Glossary

Packaging Optimization Glossary

The terms behind packaging, palletization, freight and landed cost, as Pack Studio uses them.

53 ft dry van

The standard enclosed North American semi-trailer, about 53 feet long, used as the truck in Pack Studio's published studies.

See: Truckload Optimization

Board gradeAlso: Flute, Wall construction

The construction of corrugated board, such as single-wall C flute, double-wall or triple-wall. Pack Studio selects the lowest-cost grade that survives the pallet-stack load.

See: Cost Per Part and ROI

Bounding box

The smallest rectangular box that contains a part in a given orientation. Minimal orientations in Pack Studio are the axes of the tightest bounding box.

See: Part Orientation

Break-even period

The number of months until the savings from reusing returnable packaging repay its upfront cost. Pack Studio reports it for returnable options.

See: Cost Per Part and ROI

Cost per part

Pack Studio's ranking metric. Box, protective packaging, pallet and freight costs are summed and divided by the number of parts on board.

See: Cost Per Part and ROI

Cube utilizationAlso: cube utilisation, cube fill

The share of a container's, pallet's or trailer's internal volume that is actually filled by goods. Low cube utilization means paying to ship air.

See: Truckload Optimization

Die-cut foam tray

A single foam block with a pocket cut for each part, used for finished or delicate parts.

See: Molded Tray

Dunnage

Material placed inside a container to position, separate and protect parts, such as partitions, foam inserts, molded trays and layer pads.

See: Partitions, Foam Inserts, Molded Tray

DXF, STEP, STL, 3MF and OBJ

CAD and mesh file formats Pack Studio exports. DXF carries 2D cut lines for die, waterjet, laser and router shops; STEP carries editable CAD solids; STL, 3MF and OBJ carry 3D meshes.

See: Foam Inserts

Edge crush test (ECT)Also: ECT

A rating of corrugated board's edgewise compression strength, used to predict how much stacking load a box can carry. ECT 32 is a common single-wall rating.

See: Expendable Cartons

Expendable packagingAlso: One-way packaging

Packaging used for a single shipment and then recycled or discarded, typically corrugated cartons. Best for one-way lanes and high-mix, lower-volume launches.

See: Expendable Cartons

Fast Fourier transform (FFT)Also: FFT

An algorithm that computes frequency-domain transforms quickly. In spectral packing it scores collisions and gaps for every candidate position of a part at once.

See: Technology

Fleet sizing

Calculating how many returnable containers a program needs to keep parts flowing, given volumes, transit times and return logistics.

See: Returnable Assets

Flexible layering

A packing method that builds a 3D lattice so parts interlock in every direction instead of sitting in separable layers.

See: Flexible Layering

Foam insert

A foam strip with a contour cut into the top so parts nest into it, often separating stacked rows.

See: Foam Inserts

Interlocking-free packing

A pack in which every part can be removed without breaking or deforming others, for example no parts hooked through each other like linked rings.

See: Technology

ISTA and ASTM test protocolsAlso: ISTA, ASTM

Standard transit test procedures published by the International Safe Transit Association (ISTA) and ASTM International. Virtual ISTA/ASTM testing is on the Pack Studio roadmap.

See: Pack Studio roadmap

Make versus buy

The decision to produce a component in-house or source it from a supplier. A full review weighs landed cost, not piece price alone.

See: The Packaging Perspective Series: Landed Cost by Scott Huddas

Nesting

Arranging parts so that neighbors tuck into each other's concave features or hollow interiors, such as brackets, cones and stamped panels.

See: Nesting and Repacking

Original equipment manufacturer (OEM)Also: OEM

The company that designs and assembles the final product, such as a vehicle maker, supplied by Tier 1 and Tier 2 suppliers.

See: Automotive

Packing densityAlso: Cube utilization, Fill rate

The share of a container's volume occupied by parts. Higher density means more parts per box, pallet and truck, and a lower cost per part.

See: How it works

Part orientationAlso: Pose

How a part is rotated before it is packed. Pack Studio offers stable poses, minimal poses and an Optimal pose found by searching 3D rotations.

See: Part Orientation

Piece price

The quoted unit cost of a component from a supplier, before packaging, logistics and quality costs. Comparing bids on piece price alone can hide larger downstream costs.

See: The Packaging Perspective Series: Landed Cost by Scott Huddas

Planar layering

A packing method that builds a box one flat layer at a time, each layer a grid, stacked to the ceiling.

See: Planar Layering

Product lifecycle management (PLM)Also: PLM

Software and processes that manage a product's data from design through retirement. Packaging PLM is on the Pack Studio roadmap.

See: Pack Studio roadmap

Regular slotted container (RSC)Also: RSC

The most common corrugated box style, with four flaps of equal length on top and bottom. Pack Studio's stock catalog includes 41 RSC sizes.

See: Expendable Cartons

Request for quotation (RFQ)Also: RFQ

A sourcing document asking suppliers to bid on a part or service. Pack Studio lets bids be compared on landed cost.

See: Can Pack Studio help with RFQs?

Returnable packagingAlso: Returnable container, Reusable packaging

Durable containers such as plastic totes, bins, steel racks and crates that cycle between supplier and plant. They cost more up front and pay back through reuse on steady, high-volume lanes.

See: Returnable Assets

Scalable Spectral Packing (SSP)Also: SSP, Spectral packing

The packing algorithm behind Pack Studio, developed by Inkbit and MIT researchers and published at SIGGRAPH 2023. It uses voxel grids and the fast Fourier transform to find dense, interlocking-free placements.

See: Technology

Stacking

A packing method that fills nested columns of parts, upright or on their side, then tiles the columns across the box.

See: Stacking

Thermoformed tray

A plastic tray molded to the contours of the part. Pack Studio exports thermoformed trays as STL.

See: Molded Tray

Total landed costAlso: Landed cost, True landed cost

The full cost of getting a part to its point of use: piece price plus packaging, freight, warehousing, handling and the cost of damage, scrap and quality problems. Pack Studio ranks every packaging option by landed cost per part.

See: The Packaging Perspective Series: Landed Cost by Scott Huddas

Unit load

A group of cartons or containers assembled on a pallet or skid so it can be moved as one unit by a forklift or pallet jack.

See: Pallet Optimization

Voxel

A volume element: one cell in a 3D grid, the 3D equivalent of a pixel. Spectral packing represents parts and containers as voxel grids.

See: Technology

Machine viewWhat agents read

Loading…