Facts & Figures

Pack Studio Facts & Figures

Every number on this site comes from this registry, with its condition, method and source. Pages cannot publish a figure that is not here. Download the registry as JSON or CSV.

Speed

FactValueConditionMethodSource
Time from part CAD to box, pallet, container and truck layoutPack Studiounder 90 secondsLayout generation for one part across selected containersVendor-stated performance, confirmed in the Lucid Motors reviewOne year in. Zero regrets. Lucid Motors one-year review of Pack Studio2026-06-23

Lucid Motors results

FactValueConditionMethodSource
Time per packaging estimate, historical workflowLucid Motors packaging engineering team15 to 20 minutesCarton density study, palletizing software and PowerPoint, before Pack StudioCustomer-reported, one-year reviewOne year in. Zero regrets. Lucid Motors one-year review of Pack Studio2026-06-23
Time per packaging estimate with Pack Studio, CAD import to finished reportLucid Motors packaging engineering team2 to 5 minutesStart to report, including packaging and freight costCustomer-reported, one-year reviewOne year in. Zero regrets. Lucid Motors one-year review of Pack Studio2026-06-23
Reduction in time per packaging estimateLucid Motors packaging engineering team70-85%Pack Studio versus historical three-tool workflowCustomer-reported, one-year reviewOne year in. Zero regrets. Lucid Motors one-year review of Pack Studio2026-06-23
Disconnected tools replaced by one platformLucid Motors packaging engineering team3 toolsDensity study tool, palletizing software and PowerPointCustomer-reported, one-year reviewOne year in. Zero regrets. Lucid Motors one-year review of Pack Studio2026-06-23
Packaging estimates per vehicle launchLucid Motors1,500 to 2,000Per vehicle launch, built from CAD before sourcing beginsCustomer-reported, one-year reviewOne year in. Zero regrets. Lucid Motors one-year review of Pack Studio2026-06-23
Engineering hours saved per vehicle launchLucid Motors250 to 600 hours1,500 to 2,000 estimates at 15 to 20 minutes before versus 2 to 5 minutes afterCustomer-reported, one-year reviewOne year in. Zero regrets. Lucid Motors one-year review of Pack Studio2026-06-23
Labor cost savings per vehicle launchLucid Motors$17K to $42KPer vehicle launchCustomer-reported, one-year reviewOne year in. Zero regrets. Lucid Motors one-year review of Pack Studio2026-06-23

Published cost-per-part studies

FactValueConditionMethodSource
Cost per part, Optimal orientation versus best hand-picked orientationPlastic figurine part, about 4.3 × 2.9 × 2.2 in, 0.1 lb23% lower$0.0364 to $0.0281 per part; 33 to 40 parts per box; 118,800 to 144,000 parts per truckRSC 12 × 12 × 8 in carton, single-wall C flute (ECT 32); Planar Layering with Horizontal Nesting; 48 × 40 in pallet; 53 ft dry van; freight $200 per delivery plus $2 per mile over 100 milesPack Studio simulation, published technical studyOptimal Orientation: Packing Complex Parts at the Best Angle2026-08-07
Cost per part, Optimal orientation versus best of six hand-picked orientationsSteel multiway pipe connector, about 4.2 × 3.7 × 1.8 in, 0.4 lb15% lower$0.0270 to $0.0229 per part; 44 to 54 parts per box; weight-limited truckloadSame carton, pallet, truck and freight as the figurine studyPack Studio simulation, published technical studyOptimal Orientation: Packing Complex Parts at the Best Angle2026-08-07
Cost per part, Optimize Box versus the best of 41 stock cartonsMolded plastic part, 11.6 × 4.4 × 2.1 in, about 0.4 lb16% lower$0.122 to $0.102 per part; RSC 24 × 20 × 20 in with 64 parts versus an 18.3 × 23.7 × 21.5 in single-wall C box with 72 parts0.1 in part margin; C-flute pad between layers; 48 × 40 in pallet; 53 ft dry van; freight $200 per delivery plus $2 per mile over 100 milesPack Studio simulation, published technical studyPackaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game2026-07-30
Cost per part, Optimize Box versus the best of 41 stock cartonsSame part at 2 lb (metal)24% lower$0.161 to $0.122 per part; RSC 15 × 12 × 12 in with 15 parts versus a 22.8 × 12.1 × 14.4 in single-wall C box with 30 partsErgonomic weight cap active; other settings as round 1Pack Studio simulation, published technical studyPackaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game2026-07-30
Cost per part, Optimize Box versus the best of 41 stock cartonsThin-walled funnel, about 3.9 in cube, 0.05 lb21% lower$0.0086 to $0.0068 per part; 768 funnels in RSC 24 × 20 × 18 in versus 1,245 funnels (62% more) in a 23.7 × 39.9 × 12.8 in single-wall C trayPlanar Layering with Horizontal Nesting; 0.05 in margin; same pallet, truck and freightPack Studio simulation, published technical studyPackaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game2026-07-30
Cost per part, Stacking versus Flexible LayeringSteel stamped bracket33% lower$0.081 to $0.054 per part; 14 to 23 parts per 12 × 12 × 8 in carton (1.6×)Same box and board gradePack Studio simulation, published technical studyStacking: Minimizing the Shipping Cost for Stamped Parts2026-08-17
Cost per part, Horizontal Stacking versus the unstacked baseline in a returnable rackAutomotive door panel40% lower$0.577 to $0.348 per part; 75 to 134 panels per 52 × 48 × 58 in returnable rack (1.8×); rack fleet 59 to 33Same rack and freightPack Studio simulation, published technical studyStacking: Minimizing the Shipping Cost for Stamped Parts2026-08-17

Landed cost

FactValueConditionMethodSource
Net annual result of choosing the lowest piece priceSourcing decision for one automotive part (worked example)a $791,000 lossSupplier chosen for a piece price 12 cents lower, projected to save $42,000 per year; hidden costs of $0.80 logistics, $0.42 packaging, $0.08 warehousing and $1.08 scrap and quality per partOne part, with about 400 more to review in the same programWorked example from practitioner experienceThe Packaging Perspective Series: Landed Cost2025-12-17

Scalable Spectral Packing

FactValueConditionMethodSource
Peer-reviewed publicationScalable Spectral Packing (SSP)ACM Transactions on Graphics, SIGGRAPH 2023Cui, Rong, Chen and Matusik; Inkbit and MIT CSAILPeer reviewDense, Interlocking-Free and Scalable Spectral Packing of Generic 3D Objects2023-08-01
Packing density on a benchmark of more than 6,000 objects from Thingi10K, interlocking-freeScalable Spectral Packing (SSP)35.77%Generic 3D objects packed into a cuboid containerPublished benchmarkDense, Interlocking-Free and Scalable Spectral Packing of Generic 3D Objects2023-08-01
Time to place 670 objectsScalable Spectral Packing (SSP)40 secondsAbout 36% packing densityPublished demonstrationThe chore of packing just got faster and easier2023-07-06
Time to arrange 6,596 objectsScalable Spectral Packing (SSP)two hours at 37.30% densityLarge benchmark runPublished demonstrationThe chore of packing just got faster and easier2023-07-06

Product

FactValueConditionMethodSource
Current major releasePack Studio1.10Released July 2026Release notesPack Studio 1.10 Software Release Notes2026-07-06
Built-in stock carton sizes (regular slotted containers)Pack Studio41Stock catalog used for comparisonsPublished technical studyPackaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game2026-07-30
Features available todayPack Studio12As of release 1.10Product listingPack Studio homepage (legacy Wix site, captured November 17, 2026)2026-11-17
Features in developmentPack Studio9Roadmap, timing not committedProduct listingPack Studio homepage (legacy Wix site, captured November 17, 2026)2026-11-17
Commercial launchPack StudioOctober 15, 2025Announced by Inkbit; live demos at AutoPack Summit, booth #11, October 16, 2025Press releaseInkbit Introduces Pack Studio: Advanced Software to Accelerate Packaging Design, Selection, and Engineering2025-10-15
Pricing inputsPack Studio corrugated cost estimateslive raw material prices for linerboard, corrugating medium, foams and coatings2026 developmentReported by Automotive LogisticsPack Studio, a new packaging design platform, drives packaging cost analysis upstream into logistics planning2026-07-27
Containers evaluated in a single runPack Studio analysisexpendable corrugated, returnable plastic bins, large-format metal racks, pallet configurations and full truckloads2026 development; the run ends in a one-page reportReported by Automotive LogisticsPack Studio, a new packaging design platform, drives packaging cost analysis upstream into logistics planning2026-07-27

Sources for the figures on this page

  1. One year in. Zero regrets. Lucid Motors one-year review of Pack Studio, Pack Studio, 2026-06-23. Time from part CAD to box, pallet, container and truck layout: under 90 seconds; Time per packaging estimate, historical workflow: 15 to 20 minutes; Time per packaging estimate with Pack Studio, CAD import to finished report: 2 to 5 minutes; Reduction in time per packaging estimate: 70-85%; Disconnected tools replaced by one platform: 3 tools; Packaging estimates per vehicle launch: 1,500 to 2,000; Engineering hours saved per vehicle launch: 250 to 600 hours; Labor cost savings per vehicle launch: $17K to $42K.
  2. Optimal Orientation: Packing Complex Parts at the Best Angle, Pack Studio, 2026-08-07. Cost per part, Optimal orientation versus best hand-picked orientation: 23% lower; Cost per part, Optimal orientation versus best of six hand-picked orientations: 15% lower.
  3. Packaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game, Pack Studio, 2026-07-30. Cost per part, Optimize Box versus the best of 41 stock cartons: 16% lower; Cost per part, Optimize Box versus the best of 41 stock cartons: 24% lower; Cost per part, Optimize Box versus the best of 41 stock cartons: 21% lower; Built-in stock carton sizes (regular slotted containers): 41.
  4. Stacking: Minimizing the Shipping Cost for Stamped Parts, Pack Studio, 2026-08-17. Cost per part, Stacking versus Flexible Layering: 33% lower; Cost per part, Horizontal Stacking versus the unstacked baseline in a returnable rack: 40% lower.
  5. The Packaging Perspective Series: Landed Cost, Pack Studio, 2025-12-17. Net annual result of choosing the lowest piece price: a $791,000 loss.
  6. Dense, Interlocking-Free and Scalable Spectral Packing of Generic 3D Objects, ACM Transactions on Graphics (SIGGRAPH 2023), 2023-08-01. Peer-reviewed publication: ACM Transactions on Graphics, SIGGRAPH 2023; Packing density on a benchmark of more than 6,000 objects from Thingi10K, interlocking-free: 35.77%.
  7. The chore of packing just got faster and easier, MIT News, 2023-07-06. Time to place 670 objects: 40 seconds; Time to arrange 6,596 objects: two hours at 37.30% density.
  8. Pack Studio 1.10 Software Release Notes, Pack Studio, 2026-07-06. Current major release: 1.10.
  9. Pack Studio homepage (legacy Wix site, captured November 17, 2026), Pack Studio, 2026-11-17. Features available today: 12; Features in development: 9.
  10. Inkbit Introduces Pack Studio: Advanced Software to Accelerate Packaging Design, Selection, and Engineering, Inkbit via PR Newswire, 2025-10-15. Commercial launch: October 15, 2025.
  11. Pack Studio, a new packaging design platform, drives packaging cost analysis upstream into logistics planning, Automotive Logistics, 2026-07-27. Pricing inputs: live raw material prices for linerboard, corrugating medium, foams and coatings; Containers evaluated in a single run: expendable corrugated, returnable plastic bins, large-format metal racks, pallet configurations and full truckloads.

Every figure resolves from the facts registry.

Machine viewWhat agents read

Loading…