Part Challenge

The Pack Studio Part Challenge

Bring the part that won't nest.

The Part Challenge was built for the Pack Expo 2026 show floor: bring a part, watch it pack. Now you can send yours. We run it in Pack Studio, rank every packaging option on landed cost per part and walk you through the result.

Pack Studio packaging software brochure cover

How it works.

  1. Send the part

    Upload a STEP, STL, 3MF, OBJ or IGES file, or share a link, and tell us how you pack it today.

  2. We run it

    Orientation, packing methods, protective packaging, the pallet and the truck, on your freight assumptions.

  3. You get the ranked answer

    A walkthrough with the Pack Studio team, every option ranked on cost per part, and the one-page report.

Send

Send your part.

Files go to private storage that is never served at a public URL. See the Privacy Policy.

Pack Studio office

1 Cabot Road, Suite 400Medford, MA 02155
Sales
Scott Huddas, shuddas@inkbit3d.com
Media
Jeff Enslow, jenslow@inkbit3d.com
Hours
Monday to Friday, 9:00 AM to 6:00 PM Eastern

Why

Why send a hard one.

Simple parts make every tool look good. Awkward ones show the difference: concave brackets, organic castings, parts with arms and pockets. In Pack Studio's published studies, changing only the packing decision produced 15% to 40% lower cost per part, with the part, container and freight held constant.

Cost per part in Pack Studio's published technical studies
PartPacking decisionResultDetail
Plastic figurine part, about 4.3 × 2.9 × 2.2 in, 0.1 lbOptimal orientation versus best hand-picked orientation23% lower$0.0364 to $0.0281 per part; 33 to 40 parts per box; 118,800 to 144,000 parts per truck Study
Steel multiway pipe connector, about 4.2 × 3.7 × 1.8 in, 0.4 lbOptimal orientation versus best of six hand-picked orientations15% lower$0.0270 to $0.0229 per part; 44 to 54 parts per box; weight-limited truckload Study
Molded plastic part, 11.6 × 4.4 × 2.1 in, about 0.4 lbOptimize Box versus the best of 41 stock cartons16% lower$0.122 to $0.102 per part; RSC 24 × 20 × 20 in with 64 parts versus an 18.3 × 23.7 × 21.5 in single-wall C box with 72 parts Study
Same part at 2 lb (metal)Optimize Box versus the best of 41 stock cartons24% lower$0.161 to $0.122 per part; RSC 15 × 12 × 12 in with 15 parts versus a 22.8 × 12.1 × 14.4 in single-wall C box with 30 parts Study
Thin-walled funnel, about 3.9 in cube, 0.05 lbOptimize Box versus the best of 41 stock cartons21% lower$0.0086 to $0.0068 per part; 768 funnels in RSC 24 × 20 × 18 in versus 1,245 funnels (62% more) in a 23.7 × 39.9 × 12.8 in single-wall C tray Study
Steel stamped bracketStacking versus Flexible Layering33% lower$0.081 to $0.054 per part; 14 to 23 parts per 12 × 12 × 8 in carton (1.6×) Study
Automotive door panelHorizontal Stacking versus the unstacked baseline in a returnable rack40% lower$0.577 to $0.348 per part; 75 to 134 panels per 52 × 48 × 58 in returnable rack (1.8×); rack fleet 59 to 33 Study

FAQ

Part Challenge questions.

What file types can I send?

STEP, STL, 3MF, OBJ or IGES up to 4 MB through the form, or a share link for larger files.

Where does my file go?

To private storage that is never served at a public URL. It is used to run your part and follow up with you about the result. See the Privacy Policy.

Can I watch it run instead?

Yes. Book a live demo and bring the CAD.

Rather see it live?

Book a demo and bring the part.

Sources for the figures on this page

  1. Stacking: Minimizing the Shipping Cost for Stamped Parts, Pack Studio, 2026-08-17. Range of cost-per-part reductions across seven published cases: 15% to 40% lower cost per part; Cost per part, Stacking versus Flexible Layering: 33% lower; Cost per part, Horizontal Stacking versus the unstacked baseline in a returnable rack: 40% lower.
  2. Optimal Orientation: Packing Complex Parts at the Best Angle, Pack Studio, 2026-08-07. Cost per part, Optimal orientation versus best hand-picked orientation: 23% lower; Cost per part, Optimal orientation versus best of six hand-picked orientations: 15% lower.
  3. Packaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game, Pack Studio, 2026-07-30. Cost per part, Optimize Box versus the best of 41 stock cartons: 16% lower; Cost per part, Optimize Box versus the best of 41 stock cartons: 24% lower; Cost per part, Optimize Box versus the best of 41 stock cartons: 21% lower.

Every figure resolves from the facts registry.

Machine viewWhat agents read

Loading…