Protective PackagingUser Guide

Foam Inserts

Foam inserts are die-cut strips contoured to the parts in each row. Pack Studio draws them in 3D, adds cost and weight, and exports DXF and STEP.

Best for Finished or delicate parts that need a cushioned seat.

Contoured foam inserts cradling parts in Pack Studio

Foam inserts are strips of foam with a contour cut into the top, so parts nest into the foam instead of resting on top of it. They often separate stacked rows. Pack Studio draws each piece in 3D and adds its cost and weight to the shipment.

How it works

Each insert is profiled to the actual parts in its row, at their packed positions. The profile lets every part drop in at the correct angle without being trapped. Pack Studio then extrudes each cut profile into a solid strip.

Export to manufacturing

Designing foam by hand used to mean exporting the packed parts, rebuilding the arrangement in CAD and modeling the foam around it, often hours of work. Pack Studio produces manufacturing-ready geometry straight from the pack:

  • DXF cut lines for any die, waterjet, laser or CNC router shop. Outlines are built from line segments and circular arcs, so a shop can measure and edit them.
  • STEP solids for any CAD system, built as native solids with editable faces and edges rather than triangles.

Settings

  • Part foam clearance: how far each profile is offset so parts seat and release cleanly.
  • Border margin: spacing between the profiles and the edge of the strip.

Geometry regenerates in seconds as settings change.

Questions about Foam Inserts

What file formats do foam inserts export to?

DXF cut lines for any die, waterjet, laser or CNC router shop, and STEP solids for any CAD system.

Articles on Foam Inserts

  • Parts lift out to reveal their die-cut foam pockets in Pack Studio

    TechnicalSeptember 16, 2026

    Manufacturing-Ready Dunnage Geometry, From Hours To Seconds

    Pack Studio generates die-cut foam and foam insert CAD straight from the pack: DXF cut lines and STEP solids in a few clicks instead of hours of manual CAD work.

    Qiaodong Cui3 min read

  • Two tray types in Pack Studio 1.10: die-cut foam, and thermoformed plastic molded to the part contours

    Software Release NotesJuly 6, 2026

    Pack Studio 1.10 Software Release Notes

    Pack Studio 1.10 rebuilds Stacking, sizes boxes for you, adds Optimal orientation, two tray types, dunnage CAD export, wooden crates and an in-app User Guide.

    Jack Bernatchez3 min read

Machine viewWhat agents read

Loading…