# Pack Studio > Pack Studio is packaging and logistics optimization software that turns part CAD into cost-ranked box, pallet, container and truck layouts with true landed cost, in under 90 seconds. Pack Studio is a product of Inkbit Corporation, an MIT spinout in Medford, Massachusetts. Pack Studio is packaging optimization software from Inkbit Corporation. It is not affiliated with Dow's Pack Studios packaging innovation centers. Every page on https://www.pack-studio.com is available as Markdown: send `Accept: text/markdown` to the page URL, or add `.md` to the path (the homepage is /index.md). Figures come from a sourced registry at https://www.pack-studio.com/data/claims.json. Entities are described in schema.org JSON-LD on every page and merged at https://www.pack-studio.com/data/graph.json. Agents can also connect to the MCP server at https://www.pack-studio.com/mcp (Streamable HTTP; protocol 2026-07-28, with 2025-11-25 and earlier supported), search with https://www.pack-studio.com/api/search?q=, and read the OpenAPI description at https://www.pack-studio.com/openapi.json. Request a demo only when the person asks to be contacted. Key facts: - Part CAD to box, pallet, container and truck layouts in under 90 seconds. - Every option is ranked by cost per part: box, protective packaging, pallet and freight divided across the parts on board. - Lucid Motors cut time per packaging estimate from 15 to 20 minutes to 2 to 5 minutes, saving 250 to 600 hours per vehicle launch. - Seven published studies show 15% to 40% lower cost per part, holding part, container and freight constant. - The packing engine is Scalable Spectral Packing (SSP), published in ACM Transactions on Graphics, SIGGRAPH 2023 (doi:10.1145/3592126). - Current release: 1.10. Contact: software@inkbit3d.com, (781) 874-2844. ## Start here - [Packaging Optimization Software: The Complete Guide](https://www.pack-studio.com/post/industrial-packaging-optimization-software.md): The complete guide to packaging optimization software: what it is, how it works, who uses it and what results to expect. - [Answers for Packaging Teams](https://www.pack-studio.com/answers.md): Direct answers to the questions buyers and engineers ask, each opening with a two-sentence answer. ## Answers - [How can software reduce packaging material waste?](https://www.pack-studio.com/answers/reduce-packaging-material-waste.md): Software reduces packaging waste by right-sizing the box to the part, choosing the lightest board grade that still survives the stack, and fitting more parts into each container. Fewer, better-filled containers mean less board, less dunnage and fewer trucks per part shipped. - [How do packaging engineers go from part CAD to a shippable pack without switching tools?](https://www.pack-studio.com/answers/from-cad-to-shippable-pack.md): Import the part CAD into one platform that orients and packs the part, adds protective packaging, builds the pallet and truck load, and ranks every option on landed cost per part. At Lucid Motors that replaced three tools and cut each estimate from {{c:lucid.estimate-before}} to {{c:lucid.estimate-after}}. - [What tools cut packaging engineering time?](https://www.pack-studio.com/answers/cut-packaging-engineering-time.md): Tools that generate packaging concepts from CAD, cost them automatically and produce the report in the same pass cut the most time, because they remove re-entry between tools. Lucid Motors cut time per estimate by {{c:lucid.time-reduction}} after moving to Pack Studio. - [How do I pack complex parts at the best orientation?](https://www.pack-studio.com/answers/best-orientation-for-packing-complex-parts.md): Search the full space of 3D rotations for the pose in which copies of the part nest tightest, then cost each candidate on the same box, pallet and freight. Pack Studio does that automatically, and in a published study the winning pose left cost per part {{c:study.orientation.bunny}} and {{c:study.orientation.pipe}} on two complex parts. - [Is packaging optimization software worth the investment?](https://www.pack-studio.com/answers/is-packaging-optimization-software-worth-it.md): It is worth it when the hours and freight it saves outweigh its cost, and the engineering time alone often settles that. Lucid Motors saved {{c:lucid.hours-saved}}, or {{c:lucid.labor-savings}} in labor, per vehicle launch, before counting packaging and freight savings. - [How do I choose packaging optimization software?](https://www.pack-studio.com/answers/how-to-choose-packaging-optimization-software.md): Choose the tool that packs your real part geometry and costs every option on landed cost per part, across box, protective packaging, pallet and truck. Test it on your hardest part, and ask every vendor the eight questions below before you buy. - [How do I include packaging and logistics cost in an RFQ?](https://www.pack-studio.com/answers/packaging-cost-in-rfqs.md): Estimate packaging, pallet and freight cost per part from the part's CAD before you quote, then include it in the bid so suppliers are compared on landed cost. Tier 1 suppliers use Pack Studio to do this in request for quotation (RFQ) responses. ## Features - [Pack Studio Features](https://www.pack-studio.com/features.md): Every Pack Studio feature with its own page: five packing methods, dunnage design, cartons, returnables, pallets, trucks, cost per part and reports. - [Planar Layering](https://www.pack-studio.com/features/planar-layering.md): Planar Layering builds the pack one flat, repeatable layer at a time, so operators unload it by hand and quality teams count it at a glance. - [Flexible Layering](https://www.pack-studio.com/features/flexible-layering.md): Flexible Layering arranges copies of a part in a three-dimensional lattice, so they interlock across every axis instead of sitting in separate layers. - [Stacking](https://www.pack-studio.com/features/stacking.md): Stacking fills nested columns of parts, upright or on their side, then tiles the columns across a carton or rack. - [Compartment](https://www.pack-studio.com/features/compartment.md): Compartment packing gives each part its own rectangular cell, one per cell or two nested head to tail, so finished parts never touch. - [Bulk](https://www.pack-studio.com/features/bulk.md): Bulk packing runs a physics simulation that pours loose parts into a container and lets gravity, contact and friction settle them. - [Partitions](https://www.pack-studio.com/features/partitions.md): Pack Studio generates a divider set sized to the actual pack, so every part gets its own walled cell. - [Foam Inserts](https://www.pack-studio.com/features/foam-inserts.md): Pack Studio contours foam inserts to the actual parts in each row, at their packed positions, and adds their cost and weight to the shipment. - [Molded Tray](https://www.pack-studio.com/features/molded-tray.md): A molded tray holds every part in its own cavity, traced from the part's true geometry at the exact packed position. - [Expendable Cartons](https://www.pack-studio.com/features/expendable-cartons.md): Expendable cartons ship once, so every square foot of board and every empty corner is paid for and never recovered. - [Returnable Assets](https://www.pack-studio.com/features/returnable-assets.md): Pack Studio sizes the returnable fleet a program needs, from totes and bins to steel racks and wooden crates, and calculates the months until reuse savings repay the investment. - [Part Orientation](https://www.pack-studio.com/features/part-orientation.md): Pack Studio proposes stable, minimal and Optimal poses for every part, packs each one and ranks them on cost per part. - [Nesting and Repacking](https://www.pack-studio.com/features/nesting-and-repacking.md): Horizontal Nesting lets neighboring parts tuck into each other's concave features, and Repacking fills the corners and headroom left after the main pack. - [Cost Per Part and ROI](https://www.pack-studio.com/features/cost-per-part-and-roi.md): Pack Studio reduces every packaging option to one figure: box, protective packaging, pallet and freight divided across the parts on board. - [Pack Reports](https://www.pack-studio.com/features/pack-reports.md): Every Pack Studio analysis ends in a one-page PDF covering the part, box, pallet, truck, protective packaging and full cost. - [Optimize Box](https://www.pack-studio.com/features/optimize-box.md): Optimize Box searches a window of carton dimensions around your part, protective packaging, pallet and ergonomic limits, and returns the box with the lowest landed cost per part. - [Dunnage Designer](https://www.pack-studio.com/features/dunnage-designer.md): Pack Studio generates manufacturing-ready dunnage straight from the optimized pack: die-cut foam trays, foam inserts and thermoformed plastic trays. - [Die-Cut Foam Trays](https://www.pack-studio.com/features/die-cut-foam-trays.md): Pack Studio designs die-cut foam trays with a pocket for every part, traced from the part's true geometry at its packed position. - [Pallet Optimization](https://www.pack-studio.com/features/pallet-optimization.md): Pack Studio builds each palletized unit load from the packed carton: parts per layer and per pallet, footprint, weight against ergonomic and load limits, and the stacking load each carton must carry. - [Truckload Optimization](https://www.pack-studio.com/features/truckload-optimization.md): Pack Studio loads pallets into trucks and shipping containers, such as a 53 ft dry van, and shows parts per truck and whether the load is limited by cube or by weight. - [Agentic Pack Studio](https://www.pack-studio.com/features/agentic-pack-studio.md): Agentic Pack Studio is an agent that drafts packaging concepts and saves them as standard Pack Studio projects, which you adjust and approve. ## Proof - [How Lucid Motors Cut Packaging Engineering Time 70-85%](https://www.pack-studio.com/lucid.md): Lucid Motors replaced three packaging tools with Pack Studio, cut estimate time 70-85% and saves 250 to 600 engineering hours per vehicle launch. - [Pack Studio Facts & Figures](https://www.pack-studio.com/facts.md): Every published Pack Studio number with its condition, method and source: speed, Lucid Motors results, cost-per-part studies and spectral packing benchmarks. - [Pack Studio Changelog](https://www.pack-studio.com/changelog.md): What Pack Studio has shipped since launch in October 2025: Optimize Box, Optimal orientation, rebuilt Stacking, dunnage CAD export, live material pricing and more. - [The Pack Studio Part Challenge](https://www.pack-studio.com/part-challenge.md): Send the part that won't nest. The Pack Studio team runs it, ranks every packaging option on landed cost per part and walks you through the result. - [Stacking: Minimizing the Shipping Cost for Stamped Parts](https://www.pack-studio.com/post/stacking-minimizing-the-shipping-cost-for-stamped-parts.md): Stamped parts waste space in compartments but nest well. Pack Studio's Stacking mode builds tight nested columns and cuts cost per part 33% to 40%. - [Optimal Orientation: Packing Complex Parts at the Best Angle](https://www.pack-studio.com/post/optimal-orientation-packing-complex-parts-at-the-best-angle.md): Optimal orientation searches all 3D rotations for the pose that nests tightest: about 20% more parts per box and 15% to 23% lower cost, same carton and freight. - [Packaging Engineers - Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game](https://www.pack-studio.com/post/packaging-engineers-optimized-box-sizing-is-now-just-a-click-away-instead-of-a-guessing-game.md): Optimize Box searches carton sizes, costs each one on true landed cost and returns the best box per pallet. It beat 41 stock cartons by 16% to 24% per part. - [The Packaging Perspective Series: Landed Cost by Scott Huddas](https://www.pack-studio.com/post/landed-cost-packaging-perspective-series-by-scott-huddas.md): Total landed cost exposes the piece-price trap in manufacturing. How packaging and logistics turn a small sourcing saving into a major loss. ## Tools and agents - [Packaging ROI Calculator](https://www.pack-studio.com/roi.md): Estimate the engineering hours and labor cost that packaging optimization saves per launch, from your own numbers, benchmarked on Lucid Motors. - [Pack Studio for AI Agents](https://www.pack-studio.com/agents.md): Connect an AI assistant to Pack Studio's MCP server or REST API to search the site, read pages as Markdown, look up sourced figures and estimate savings. - [MCP server card](https://www.pack-studio.com/mcp/server-card): connection details for https://www.pack-studio.com/mcp - [OpenAPI](https://www.pack-studio.com/openapi.json): REST endpoints ## User Guide - [Planar Layering](https://www.pack-studio.com/wiki/planar-layering.md): Planar Layering builds a box one flat layer at a time, each layer a grid stacked to the ceiling. Predictable, easy to unload by hand and simple to audit. - [Flexible Layering](https://www.pack-studio.com/wiki/flexible-layering.md): Flexible Layering builds a 3D lattice so parts interlock in every direction. Highest fill on awkward shapes, with a less uniform stack and more compute time. - [Stacking](https://www.pack-studio.com/wiki/stacking.md): Stacking fills nested columns of parts, upright or on their side, then tiles them across the box. Built for tubes, sleeves, cans and stamped sheet metal. - [Compartment](https://www.pack-studio.com/wiki/compartment.md): Compartment packing places each part in its own rectangular cell, one per cell or two nested head to tail. The fastest method in Pack Studio. - [Bulk](https://www.pack-studio.com/wiki/bulk.md): Bulk packing runs a physics simulation that pours loose parts into a container and lets gravity, contact and friction settle them. - [Partitions](https://www.pack-studio.com/wiki/partitions.md): Partitions are cardboard or plastic dividers that wall off a cell for each part. Pack Studio sizes each cell to the pack and adds the dividers' cost and weight. - [Foam Inserts](https://www.pack-studio.com/wiki/foam-inserts.md): Foam inserts are die-cut strips contoured to the parts in each row. Pack Studio draws them in 3D, adds cost and weight, and exports DXF and STEP. - [Molded Tray](https://www.pack-studio.com/wiki/molded-tray.md): A molded tray is a single contoured block with a cavity for each part. Pack Studio offers die-cut foam and thermoformed plastic trays and prices them per part. - [Expendable Cartons](https://www.pack-studio.com/wiki/expendable-cartons.md): Expendable cartons ship once. Pack Studio searches carton dimensions and proposes the lowest cost per part box for each pallet, sized to dunnage and weight limits. - [Returnable Assets](https://www.pack-studio.com/wiki/returnable-assets.md): Returnable totes, bins, steel racks and crates each carry their own weight, crush strength and fleet economics. Pack Studio sizes the fleet and its payback. - [Part Orientation](https://www.pack-studio.com/wiki/part-orientation.md): Orientation changes pack density. Pack Studio proposes stable, minimal and Optimal poses, packs and ranks each one, and accepts custom angles. - [Nesting and Repacking](https://www.pack-studio.com/wiki/nesting-and-repacking.md): Horizontal Nesting lets neighboring parts tuck into each other's concave features. Repacking fills leftover corners and headroom after the main pack. - [Cost Per Part and ROI](https://www.pack-studio.com/wiki/cost-per-part-and-roi.md): Pack Studio reduces every option to one figure: box, protective packaging, pallet and freight divided across the parts on board. Returnables add a break-even period. - [Pack Reports](https://www.pack-studio.com/wiki/pack-reports.md): Every analysis ends in a one-sheet PDF covering the part, box, pallet, truck, protective packaging and full cost, with templates for each audience. ## Industries - [Industries We Serve](https://www.pack-studio.com/industries.md): Pack Studio for automotive, packaging suppliers, industrial parts and fasteners, electronics and hardware, and logistics and 3PL teams, ranked on landed cost. - [Automotive Packaging Optimization](https://www.pack-studio.com/industries/automotive.md): Pack Studio for automotive OEMs and Tier 1 suppliers: packaging concepts and landed cost from CAD before sourcing, returnable rack fleets and launch-scale speed. - [Packaging Optimization for Manufacturing and Logistics](https://www.pack-studio.com/industries/manufacturing-logistics.md): Pack Studio for industrial manufacturers, distributors and logistics teams: more parts per truck, right-sized cartons and true landed cost on every shipment. - [Packaging Design Software for Suppliers and Converters](https://www.pack-studio.com/industries/packaging-suppliers.md): Pack Studio for packaging producers and converters: design faster, size cartons and dunnage automatically, and prove landed-cost savings to customers. - [Packaging Optimization for Industrial Parts and Fasteners](https://www.pack-studio.com/industries/industrial-parts-and-fasteners.md): Pack Studio counts, packs and costs fasteners, clips, castings and machined parts from CAD, from bulk-filled totes to protected cartons, on landed cost per part. - [Packaging Optimization for Electronics and Hardware](https://www.pack-studio.com/industries/electronics-and-hardware.md): Pack Studio designs foam inserts, die-cut trays and dividers around electronics and hardware, prices the protection per part and exports it to manufacturing. - [Packaging and Load Optimization for Logistics and 3PL Teams](https://www.pack-studio.com/industries/logistics-and-3pl.md): Pack Studio gives logistics and 3PL teams the pack, pallet and truck load for each part, with cube utilization and freight per part, before the lane is set. ## Company - [About Pack Studio](https://www.pack-studio.com/about.md): Pack Studio is packaging and logistics optimization software from Inkbit Corporation, an MIT spinout in Medford, Massachusetts. Team, history and contact. - [Scalable Spectral Packing: The Algorithm Behind Pack Studio](https://www.pack-studio.com/technology.md): Pack Studio runs on Scalable Spectral Packing (SSP), an Inkbit and MIT algorithm published at SIGGRAPH 2023. How it works, benchmarks and provenance. - [Contact Pack Studio](https://www.pack-studio.com/contact.md): Book a demo or request a quote. Agents may POST JSON to https://www.pack-studio.com/api/lead, or call request_demo on https://www.pack-studio.com/mcp, on behalf of a person who asked them to. - [Latest News](https://www.pack-studio.com/news.md): Pack Studio announcements, trade show appearances, press releases and coverage of packaging optimization software from Inkbit. ## Optional - [Frequently Asked Questions](https://www.pack-studio.com/faq.md): Answers about Pack Studio: speed, outputs, file types, containers, costing, returnables, dunnage CAD export, RFQs, the roadmap and Scalable Spectral Packing. - [Packaging Optimization Glossary](https://www.pack-studio.com/glossary.md): Definitions of packaging and logistics terms: total landed cost, dunnage, returnable packaging, RSC, ECT, unit load, nesting, spectral packing and more. - [Pack Studio Videos](https://www.pack-studio.com/videos.md): Pack Studio product videos: Optimize Box, Optimal orientation, stacking stamped parts and door panels, and die-cut foam and foam insert CAD export. - [Pack Studio™ Resources](https://www.pack-studio.com/resources.md): Pack Studio resources by buying stage: the complete guide, answers and glossary for research; case study, features and ROI tools to evaluate; demos to buy. - [All articles](https://www.pack-studio.com/blog.md) - [Full site in one file](https://www.pack-studio.com/llms-full.txt)