Features
Pack Studio Features
Every feature ends in cost per part.
Twenty features, each with its own page, from five packing methods to manufacturing-ready dunnage CAD. Every one feeds the same ranked answer: true landed cost per part across box, protective packaging, pallet and freight.
Explore
Twenty features. One ranked answer.
Pick a feature for the problem it solves, its published results and how to use it.
Packing methods
Five ways to arrange parts in a container, each built for a different part shape.
Planar Layering
Flat layers. Easy to unload.
Planar Layering builds the pack one flat, repeatable layer at a time, so operators unload it by hand and quality teams count it at a glance.
Flexible Layering
Interlock in every direction.
Flexible Layering arranges copies of a part in a three-dimensional lattice, so they interlock across every axis instead of sitting in separate layers.
Stacking
Nest stamped parts. Ship fewer racks.
Stacking fills nested columns of parts, upright or on their side, then tiles the columns across a carton or rack.
Compartment
One cell per part. Zero contact.
Compartment packing gives each part its own rectangular cell, one per cell or two nested head to tail, so finished parts never touch.
Bulk
Pour, settle, count, cost.
Bulk packing runs a physics simulation that pours loose parts into a container and lets gravity, contact and friction settle them.
Dunnage and protection
Partitions, foam and trays, designed around the pack and priced into every result.
Partitions
Dividers sized to the pack.
Pack Studio generates a divider set sized to the actual pack, so every part gets its own walled cell.
Foam Inserts
Contoured foam, straight to CAD.
Pack Studio contours foam inserts to the actual parts in each row, at their packed positions, and adds their cost and weight to the shipment.
Molded Tray
A pocket for every part.
A molded tray holds every part in its own cavity, traced from the part's true geometry at the exact packed position.
Dunnage Designer
Dunnage designed in seconds, not hours.
Pack Studio generates manufacturing-ready dunnage straight from the optimized pack: die-cut foam trays, foam inserts and thermoformed plastic trays.
Die-Cut Foam Trays
Pockets traced from real geometry.
Pack Studio designs die-cut foam trays with a pocket for every part, traced from the part's true geometry at its packed position.
Containers and loads
Cartons, returnables, pallets and trucks, evaluated in the same run.
Expendable Cartons
Ship once. Spend less doing it.
Expendable cartons ship once, so every square foot of board and every empty corner is paid for and never recovered.
Returnable Assets
Size the fleet. Know the payback.
Pack Studio sizes the returnable fleet a program needs, from totes and bins to steel racks and wooden crates, and calculates the months until reuse savings repay the investment.
Pallet Optimization
Every pallet pattern, costed.
Pack Studio builds each palletized unit load from the packed carton: parts per layer and per pallet, footprint, weight against ergonomic and load limits, and the stacking load each carton must carry.
Truckload Optimization
More parts per truck. Less freight.
Pack Studio loads pallets into trucks and shipping containers, such as a 53 ft dry van, and shows parts per truck and whether the load is limited by cube or by weight.
Optimization
The engine finds the box, the pose and the nest that cost least to ship.
Part Orientation
The densest pose is rarely obvious.
Pack Studio proposes stable, minimal and Optimal poses for every part, packs each one and ranks them on cost per part.
Nesting and Repacking
Fill the air you ship.
Horizontal Nesting lets neighboring parts tuck into each other's concave features, and Repacking fills the corners and headroom left after the main pack.
Optimize Box
The cost-optimal box, found for you.
Optimize Box searches a window of carton dimensions around your part, protective packaging, pallet and ergonomic limits, and returns the box with the lowest landed cost per part.
Cost and reporting
Every option reduced to cost per part, then shared as a one-page report.
Cost Per Part and ROI
One number decides.
Pack Studio reduces every packaging option to one figure: box, protective packaging, pallet and freight divided across the parts on board.
Pack Reports
One click. One page. Any audience.
Every Pack Studio analysis ends in a one-page PDF covering the part, box, pallet, truck, protective packaging and full cost.
Coming soon
What the Pack Studio team is building next.
Agentic Pack Studio
The agent drafts. You approve.
Agentic Pack Studio is an agent that drafts packaging concepts and saves them as standard Pack Studio projects, which you adjust and approve.
Available today
The twelve capabilities in release 1.10.
The official capability list behind the feature pages above.
Automated Pack Design by Part Orientation
Pack Studio proposes stable poses, where the part rests without tipping, minimal poses with the tightest bounding box, and an Optimal pose it finds by searching 3D rotations.
Multi-Box & Orientation Comparison
Run one part against stock cartons and orientations at once, or let Optimize Box search a window of carton dimensions for the lowest landed cost per part.
Instant Packaging Cost Estimation
Every option is costed as it is generated: carton, board grade, protective packaging and pallet.
Unit Load Dynamics Calculation
Pack Studio works out each palletized unit load: parts per layer and per pallet, footprint, weight against ergonomic and load limits, and the stacking load each carton must carry.
Truck & Container Loadout Simulation
Pallets are loaded into trucks and shipping containers, such as a 53 ft dry van, to show parts per truck and whether the load is limited by cube or by weight.
Logistics Cost Integration
Freight is part of every result.
Returnable Packaging Fleet Calculator
For totes, bins, steel racks and crates, Pack Studio sizes the fleet a program needs.
Returnable Packaging ROI Calculation
Compares returnable and expendable packaging and reports the return on investment (ROI) as a break-even period: the number of months until reuse savings repay the upfront cost of the fleet.
PKG to PKG Performance Comparison
Put packaging options side by side on the same part, pallet and freight: parts per box, pallet and truck, density, weight and cost per part, ranked from lowest cost.
One-Page Executive Report
Each analysis ends in a one-sheet PDF covering the part, box, pallet, truck, protective packaging and full cost.
Dunnage Visualization
See partitions, foam inserts and trays in 3D around the packed parts.
Automated Dunnage Designer
Generates manufacturing-ready die-cut foam trays, foam inserts and thermoformed plastic trays from the pack.
Outputs
What every analysis returns.
| Output | What it contains | Format |
|---|---|---|
| Ranked options | Every packaging option with parts per box, pallet and truck, density, weight and cost per part | In app |
| Executive report | One-sheet summary of the part, box, pallet, truck, protective packaging and full cost | |
| Pack geometry | The current pack, with parts, box and dunnage available separately | 3MF, STL, OBJ |
| Foam dunnage | Die-cut foam trays and foam inserts as cut lines and editable solids | DXF, STEP |
| Thermoformed trays | Plastic trays molded to the part contours | STL |
RoadmapIn development
Nine features in development.
These capabilities are in development. Timing is not committed; ask in a demo about early access.
- Sustainability & CO2 Impact Metrics
- Virtual ISTA/ASTM TestingRefers to International Safe Transit Association (ISTA) and ASTM International test protocols.
- Specification Management
- Part Variant Overlay
- Market Forecasting
- Packaging PLMPLM stands for product lifecycle management.
- Parametric Rack Models
- Packaging Score
- Partner-Led Improvements
FAQ
Feature questions.
What file types and containers are supported?
Pack Studio imports part CAD directly, and the Part Designer describes a part as a box, sphere or cylinder when no CAD model exists yet. Containers include expendable corrugated cartons, plastic totes and bins, steel racks, crates and wooden crates on an integrated skid, loaded onto pallets and into trucks or shipping containers. Packs export to 3MF, STL and OBJ; die-cut foam and foam inserts export to STEP and DXF; thermoformed trays export to STL.
Can Pack Studio size a box for me?
Yes. Optimize Box, added in release 1.10, searches a window of carton dimensions using your packing method, margins, dunnage, ergonomic weight caps and pallet policy, and returns the box with the lowest landed cost per part for each selected pallet. In the published study it beat the best of 41 stock cartons by 16% lower for a 0.4 lb part and 24% lower for a 2 lb part.
Does Pack Studio work for returnable packaging?
Yes. Totes, bins, steel racks and crates each carry their own weight, crush strength and fleet economics. Pack Studio sizes the fleet and calculates the months until reuse savings repay the upfront cost. See Returnable Assets.
Can I export dunnage to CAD?
Yes. Die-cut foam trays and foam inserts export as DXF cut lines for die, waterjet, laser or CNC router shops and as STEP solids for any CAD system. Thermoformed plastic trays export as STL. Pocket clearance, base height and border margin are adjustable, and the geometry regenerates in seconds.
Where do the corrugated cost estimations come from?
Pack Studio uses market pricing for packaging materials to cost boxes and some dunnage. For each candidate box it selects the lowest-cost corrugated board grade that survives the pallet-stack load and meets a minimum strength floor for the box size, moving larger boxes to double- or triple-wall automatically.
See every feature on your own part.
A live demo runs on your geometry, your containers and your freight.
Sources for the figures on this page
- Pack Studio 1.10 Software Release Notes, Pack Studio, 2026-07-06. Current major release: 1.10.
- Packaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game, Pack Studio, 2026-07-30. Built-in stock carton sizes (regular slotted containers): 41; Cost per part, Optimize Box versus the best of 41 stock cartons: 16% lower; Cost per part, Optimize Box versus the best of 41 stock cartons: 24% lower.
Every figure resolves from the facts registry.