ContainerUser Guide

Returnable Assets

Returnable totes, bins, steel racks and crates each carry their own weight, crush strength and fleet economics. Pack Studio sizes the fleet and its payback.

Best for Steady lanes and high-volume programs with return logistics.

Returnable fleet packing optimization with totes and racks

Reusable totes, bins, steel racks and crates each carry their own weight, crush strength and fleet economics. Pack Studio sizes the fleet a program needs and calculates the number of months until reuse savings repay the upfront cost.

What Pack Studio calculates

  • Pack density inside each returnable, using any packing method.
  • Fleet size for the program.
  • Break-even period: months until reuse savings repay the investment. See Cost Per Part and ROI.

Wooden crates

Release 1.10 added wooden crates: a rigid crate mounted on an integrated skid, with brackets. A crate can be modeled as a reusable asset or a single-use expendable.

In the published studies

A denser pack shrinks the fleet. In the door panel study, Horizontal Stacking in a 52 × 48 × 58 in returnable rack fit 134 panels instead of 75, cut cost per part 40% lower and reduced the rack fleet from 59 racks to 33.

When to use it

  • Steady, high-volume lanes with return logistics.
  • Programs where damage or waste from one-way packaging is costly.
  • Fleet planning before a launch, while the investment is still flexible.

Questions about Returnable Assets

How does Pack Studio measure returnable payback?

It calculates the number of months until reuse savings repay the upfront cost of the fleet, reported as a break-even period.

Articles on Returnable Assets

  • The same bent stamped part in the same carton: manual orientation at $0.08 per part versus Pack Studio's stacking orientation at $0.05 per part

    TechnicalAugust 17, 2026

    Stacking: Minimizing the Shipping Cost for Stamped Parts

    Stamped parts waste space in compartments but nest well. Pack Studio's Stacking mode builds tight nested columns and cuts cost per part 33% to 40%.

    Qiaodong Cui5 min read

  • Two tray types in Pack Studio 1.10: die-cut foam, and thermoformed plastic molded to the part contours

    Software Release NotesJuly 6, 2026

    Pack Studio 1.10 Software Release Notes

    Pack Studio 1.10 rebuilds Stacking, sizes boxes for you, adds Optimal orientation, two tray types, dunnage CAD export, wooden crates and an in-app User Guide.

    Jack Bernatchez3 min read

Sources for the figures on this page

  1. Stacking: Minimizing the Shipping Cost for Stamped Parts, Pack Studio, 2026-08-17. Cost per part, Horizontal Stacking versus the unstacked baseline in a returnable rack: 40% lower.

Every figure resolves from the facts registry.

Machine viewWhat agents read

Loading…