How it works
How Pack Studio Works
From part CAD to landed cost.
Pack Studio goes from part CAD to box, pallet, container and truck layouts in under 90 seconds, and from CAD import to a finished, costed report in 2 to 5 minutes at Lucid Motors. Here is what happens in between.
Options ranked by cost per part
- 1Optimize Box22.8 × 12.1 × 14.4 in · 30 parts$0.122
- 2Best stock carton15 × 12 × 12 in · 15 parts$0.161
24% lower cost per part. 2 lb part, same pallet, truck and freight. See the study
Three steps
Import. Define. Decide.
Import the part
Bring in part CAD directly, with no intermediate files, manual measurement or separate density studies. Before CAD exists, the Part Designer describes the part as a box, sphere or cylinder for quick concepting.
Define the standards
Choose a packing method, margins, protective packaging, ergonomic weight caps, pallets, trucks and freight rates. Save the setup as a packing environment and apply it to the next analysis in two clicks.
Decide on cost per part
Pack Studio generates options in seconds and ranks them by cost per part. Pick one, review it in 3D and send the one-page executive report.
PartPackProtectPalletizeLoadCost
Six decisions, one optimization.
Packaging is more than geometry. Pack Studio solves orientation, packing, dunnage, palletization, truck loadout and cost together, so a change in one shows up in the answer.
- 01
Orient the part
Stable, minimal and Optimal poses. Optimal searches all 3D rotations for the densest lattice.
- 02
Pack the container
Five methods: Planar Layering, Flexible Layering, Stacking, Compartment and Bulk, with nesting and repacking.
- 03
Protect the parts
Partitions, foam inserts, die-cut foam and thermoformed trays, each priced into the pack.
- 04
Build the unit load
Variable-columnar pallet layouts, weight and stacking load, with board grade chosen to survive the stack.
- 05
Load the truck
Pallets into trucks and containers such as a 53 ft dry van, limited by cube or by weight.
- 06
Rank on landed cost
Box, protective packaging, pallet and freight divided across the parts on board.
The ranking metric
One number decides.
Freight is set as a cost per delivery plus a cost per mile, so a denser pack shows up directly as a lower cost per part. Packaging materials are priced from market pricing, and Pack Studio picks the lowest-cost corrugated board grade that survives the pallet-stack load.
Settings that carry across
Set it once. Reuse it everywhere.
- Packing method and part orientation choices.
- Margins around each part and dunnage allowances.
- Ergonomic weight caps per box.
- Palletization policy, pallets and trucks.
- Freight rates per delivery and per mile.
- Packing environments that bundle all of the above as a reusable profile per customer or plant.
Timing
Seconds to options. Minutes to report.
- Part CAD to box, pallet, container and truck layouts
- <90 s
- CAD import to finished report at Lucid Motors
- 2-5 min
- The same estimate in Lucid's previous three-tool workflow
- 15-20 min
FAQ
Workflow questions.
How fast are Pack Studio simulations?
Pack Studio goes from part CAD to box, pallet, container and truck layouts in under 90 seconds. At Lucid Motors a complete estimate, from CAD import to finished report with packaging and freight cost, takes 2 to 5 minutes, down from 15 to 20 minutes.
How does Pack Studio calculate cost per part?
Every option is reduced to one figure. Box, protective packaging, pallet and freight are summed and divided across the parts on board, so the lowest-cost option ranks first. For returnable fleets, the result is also expressed as a break-even period in months.
What packing methods does Pack Studio support?
Five: Planar Layering, Flexible Layering, Stacking, Compartment and Bulk. Each suits a different part shape, from flat-faced parts picked layer by layer to small loose parts settled by physics simulation.
What outputs do I get?
Every run returns packaging options ranked by cost per part, with parts per box, pallet and truck, density and weight. Each analysis ends in a one-page executive PDF covering the part, box, pallet, truck, protective packaging and full cost, and the pack, box and dunnage can be exported as CAD.
Bring a part. Leave with a ranked answer.
Book a live demo on your own geometry.
Sources for the figures on this page
- Packaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game, Pack Studio, 2026-07-30. Cost per part, Optimize Box versus the best of 41 stock cartons: 24% lower.
- One year in. Zero regrets. Lucid Motors one-year review of Pack Studio, Pack Studio, 2026-06-23. Time from part CAD to box, pallet, container and truck layout: under 90 seconds; Time per packaging estimate with Pack Studio, CAD import to finished report: 2 to 5 minutes; Time per packaging estimate, historical workflow: 15 to 20 minutes.
Every figure resolves from the facts registry.