ToolsROI calculator

Packaging ROI Calculator

Run the Lucid math on your launch.

Estimate the return on investment (ROI) in engineering time: the hours and labor cost Pack Studio saves per launch, from your own estimate count, minutes per estimate and labor rate. The defaults sit at the low end of Lucid Motors' published results.

Your launch, your numbers.

Your launch
250 engineering hours saved per launch$17,500 labor savings per launch$17,500 labor savings per year

Defaults sit at the low end of Lucid's range. Lucid's published result is 250 to 600 hours and $17K to $42K per launch. The calculator multiplies estimates by minutes saved; it counts engineering labor only, not packaging or freight savings, and it is an estimate, not a quote.

Method

How the estimate works.

The estimate counts engineering labor only. It leaves out the returns that are usually larger, which is why it is the conservative number to take to a budget review:

  • Packaging and freight per part: denser packs and right-sized boxes lower the landed cost of every part shipped. See Cost Per Part and ROI.
  • Returnable fleet capital: a denser pack shrinks the fleet a program has to buy. See Returnable Assets.
  • Faster sourcing: packaging cost arrives before the request for quotation (RFQ), not after it. See packaging cost in RFQs.

Benchmark

The Lucid Motors benchmark.

Lucid Motors results per vehicle launch
MeasureLucid Motors
Packaging estimates per launch1,500 to 2,000
Minutes per estimate before Pack Studio15 to 20 minutes
Minutes per estimate with Pack Studio2 to 5 minutes
Time reduction per estimate70-85%
Engineering hours saved per launch250 to 600 hours
Labor savings per launch$17K to $42K

Beyond labor

Where the bigger return is.

Scott Huddas told Automotive Logistics that the labor savings are the conservative part of the benefit, and that the larger gains come from packaging and freight optimization. Across seven published Pack Studio studies, changing only the packing decision produced 15% to 40% lower cost per part, with the part, container and freight held constant.

Cost per part in Pack Studio's published technical studies
PartPacking decisionResultDetail
Plastic figurine part, about 4.3 × 2.9 × 2.2 in, 0.1 lbOptimal orientation versus best hand-picked orientation23% lower$0.0364 to $0.0281 per part; 33 to 40 parts per box; 118,800 to 144,000 parts per truck Study
Steel multiway pipe connector, about 4.2 × 3.7 × 1.8 in, 0.4 lbOptimal orientation versus best of six hand-picked orientations15% lower$0.0270 to $0.0229 per part; 44 to 54 parts per box; weight-limited truckload Study
Molded plastic part, 11.6 × 4.4 × 2.1 in, about 0.4 lbOptimize Box versus the best of 41 stock cartons16% lower$0.122 to $0.102 per part; RSC 24 × 20 × 20 in with 64 parts versus an 18.3 × 23.7 × 21.5 in single-wall C box with 72 parts Study
Same part at 2 lb (metal)Optimize Box versus the best of 41 stock cartons24% lower$0.161 to $0.122 per part; RSC 15 × 12 × 12 in with 15 parts versus a 22.8 × 12.1 × 14.4 in single-wall C box with 30 parts Study
Thin-walled funnel, about 3.9 in cube, 0.05 lbOptimize Box versus the best of 41 stock cartons21% lower$0.0086 to $0.0068 per part; 768 funnels in RSC 24 × 20 × 18 in versus 1,245 funnels (62% more) in a 23.7 × 39.9 × 12.8 in single-wall C tray Study
Steel stamped bracketStacking versus Flexible Layering33% lower$0.081 to $0.054 per part; 14 to 23 parts per 12 × 12 × 8 in carton (1.6×) Study
Automotive door panelHorizontal Stacking versus the unstacked baseline in a returnable rack40% lower$0.577 to $0.348 per part; 75 to 134 panels per 52 × 48 × 58 in returnable rack (1.8×); rack fleet 59 to 33 Study

For agents

Use it from an agent.

The same formula is available as JSON at /api/roi and as the estimate_engineering_savings tool on the Pack Studio MCP server, so an assistant can run the numbers with you and cite the Lucid benchmark with its source.

FAQ

Calculator questions.

Is this a quote?

No. It estimates engineering labor saved per launch from the numbers you enter. Pack Studio does not publish a price list; request a quote on the contact page.

Where do the defaults come from?

They sit at the low end of Lucid Motors' published results: 1,500 estimates per launch, 15 minutes before and 5 minutes after, at $70 per hour.

Why does the calculator leave out freight savings?

Freight and packaging savings depend on your parts, containers and lanes, so they are measured in a demo on your own geometry rather than estimated from averages.

Get the number for your own parts.

A live demo runs on your CAD, your containers and your freight.

Sources for the figures on this page

  1. One year in. Zero regrets. Lucid Motors one-year review of Pack Studio, Pack Studio, 2026-06-23. Engineering hours saved per vehicle launch: 250 to 600 hours; Labor cost savings per vehicle launch: $17K to $42K; Packaging estimates per vehicle launch: 1,500 to 2,000; Time per packaging estimate, historical workflow: 15 to 20 minutes; Time per packaging estimate with Pack Studio, CAD import to finished report: 2 to 5 minutes; Reduction in time per packaging estimate: 70-85%.
  2. Stacking: Minimizing the Shipping Cost for Stamped Parts, Pack Studio, 2026-08-17. Range of cost-per-part reductions across seven published cases: 15% to 40% lower cost per part; Cost per part, Stacking versus Flexible Layering: 33% lower; Cost per part, Horizontal Stacking versus the unstacked baseline in a returnable rack: 40% lower.
  3. Optimal Orientation: Packing Complex Parts at the Best Angle, Pack Studio, 2026-08-07. Cost per part, Optimal orientation versus best hand-picked orientation: 23% lower; Cost per part, Optimal orientation versus best of six hand-picked orientations: 15% lower.
  4. Packaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game, Pack Studio, 2026-07-30. Cost per part, Optimize Box versus the best of 41 stock cartons: 16% lower; Cost per part, Optimize Box versus the best of 41 stock cartons: 24% lower; Cost per part, Optimize Box versus the best of 41 stock cartons: 21% lower.

Every figure resolves from the facts registry.

Machine viewWhat agents read

Loading…