TechnologyProvenance

Scalable Spectral Packing: The Algorithm Behind Pack Studio

Peer-reviewed research, built in-house.

Pack Studio's packing engine is Scalable Spectral Packing (SSP), developed by Inkbit and MIT researchers and published in ACM Transactions on Graphics, SIGGRAPH 2023. This page documents what it is, how it works and where it came from.

The problem

Packing real parts is hard.

Placing many irregular 3D objects densely into a container is a classic hard problem in computational geometry. Exact solutions do not scale, and even good approximations are difficult when parts have arbitrary shapes and the pack must come apart cleanly.

Real packaging adds a further constraint: the pack must be interlocking-free, meaning every part can be removed without breaking or deforming the others. Parts hooked through each other like linked rings are not a valid pack, however dense.

How SSP works

Geometry, solved in the frequency domain.

  1. Voxelize

    Parts and the container are represented as voxel grids, the 3D equivalent of pixels.

  2. Score every position at once

    Collisions and gaps between a part and everything already placed are computed as correlations, using the fast Fourier transform (FFT). One transform scores every candidate position of the part simultaneously.

  3. Place densely

    A cost function, also computed with FFTs, favors positions that minimize gaps against the container walls and neighboring parts.

  4. Stay interlocking-free

    Interlocking detection and correction run in the same framework, so the finished pack can be disassembled.

Published benchmarks

Dense at scale, fast in practice.

Interlocking-free packing density, more than 6,000 objects from the Thingi10K set
35.77%
To place 670 objects at about 36% density
40 s
To arrange 6,596 objects
two hours at 37.30% density

Benchmarks are from the published paper and MIT's coverage of it. Pack Studio applies the same engine to packaging, then ranks the result on landed cost.

Provenance

Where Pack Studio's engine came from.

Pack Studio technology timeline
DateMilestoneSource
July 2023MIT News reports the spectral packing method developed by MIT and Inkbit researchersMIT News
August 2023"Dense, Interlocking-Free and Scalable Spectral Packing of Generic 3D Objects" published in ACM Transactions on Graphics and presented at SIGGRAPH 2023doi:10.1145/3592126
October 15, 2025Inkbit launches Pack Studio, bringing the packing algorithms from its additive manufacturing build preparation tools to packaging and supply chain engineersPress release
July 2026Pack Studio 1.10 adds Optimal orientation, rebuilt Stacking and Optimize BoxRelease notes
August to September 2026The Pack Studio Technical Series documents orientation, stacking and dunnage resultsArticles
Research record
ItemDetail
PaperDense, Interlocking-Free and Scalable Spectral Packing of Generic 3D Objects
VenueACM Transactions on Graphics, Volume 42, Issue 4, Article 141 (SIGGRAPH 2023)
AuthorsQiaodong Cui (Inkbit), Victor Rong (MIT), Desai Chen (Inkbit), Wojciech Matusik (MIT CSAIL and Inkbit)
DOI10.1145/3592126
Open access copyMIT DSpace

Pack Studio's lead technical inventor, Qiaodong Cui, Ph.D., is the paper's lead author and writes the Pack Studio Technical Series.

FAQ

Technology questions.

What is Scalable Spectral Packing?

Scalable Spectral Packing (SSP) is the packing algorithm behind Pack Studio. It represents parts and containers as voxel grids and uses the fast Fourier transform (FFT) to score every candidate position at once, producing dense, interlocking-free packs. It was published in ACM Transactions on Graphics, SIGGRAPH 2023. See Technology.

How is Pack Studio different from Pack Assistant?

Pack Studio runs on Inkbit's own packing engine, Scalable Spectral Packing (SSP), published in ACM Transactions on Graphics, SIGGRAPH 2023. Packaging and freight cost are built into every result, and each analysis ends in a one-click executive report. Lucid Motors describes the built-in cost estimates as something it has not seen in other packaging software. For a side-by-side comparison, bring a part to a demo.

How fast are Pack Studio simulations?

Pack Studio goes from part CAD to box, pallet, container and truck layouts in under 90 seconds. At Lucid Motors a complete estimate, from CAD import to finished report with packaging and freight cost, takes 2 to 5 minutes, down from 15 to 20 minutes.

See the engine on your parts.

Bring an awkward part. Watch it pack.

Sources for the figures on this page

  1. Dense, Interlocking-Free and Scalable Spectral Packing of Generic 3D Objects, ACM Transactions on Graphics (SIGGRAPH 2023), 2023-08-01. Peer-reviewed publication: ACM Transactions on Graphics, SIGGRAPH 2023; Packing density on a benchmark of more than 6,000 objects from Thingi10K, interlocking-free: 35.77%.
  2. The chore of packing just got faster and easier, MIT News, 2023-07-06. Time to place 670 objects: 40 seconds; Time to arrange 6,596 objects: two hours at 37.30% density.
  3. One year in. Zero regrets. Lucid Motors one-year review of Pack Studio, Pack Studio, 2026-06-23. Time from part CAD to box, pallet, container and truck layout: under 90 seconds; Time per packaging estimate with Pack Studio, CAD import to finished report: 2 to 5 minutes; Time per packaging estimate, historical workflow: 15 to 20 minutes.

Every figure resolves from the facts registry.

Machine viewWhat agents read

Loading…