Protective PackagingUser Guide

Molded Tray

A molded tray is a single contoured block with a cavity for each part. Pack Studio offers die-cut foam and thermoformed plastic trays and prices them per part.

Best for High-value parts that need a precise, presentation-grade fit.

Molded tray: a contoured foam block with a cavity for each part

A molded tray is a single contoured block with a cavity cut for each part. Pack Studio designs the cavities around the pack and includes the tray's price in the cost per part.

Two tray types

Release 1.10 reworked trays into two options:

  • Die-cut foam: one foam block with a pocket per part. Exports as DXF cut lines and STEP solids.
  • Thermoformed plastic: a tray molded to the part contours. Exports as STL.

Traced from real geometry

Each pocket is traced from the part's true geometry, so concave features stay accurate, such as the neck between a bolt head and its shaft. Pockets sit at the exact position and orientation Pack Studio already chose, so the tray matches the reviewed and costed layout. Round pockets come out as exact cylindrical walls.

Settings

  • Part foam clearance: how far each pocket is offset outward so parts seat and release cleanly.
  • Base height: the solid foam floor beneath the pockets.
  • Border margin: spacing between the pockets and the block edge.

The tray regenerates in seconds as settings change.

Questions about Molded Tray

Which tray types does Pack Studio support?

Two, since release 1.10: die-cut foam, which exports to STEP and DXF, and thermoformed plastic molded to the part contours, which exports to STL.

Articles on Molded Tray

  • Parts lift out to reveal their die-cut foam pockets in Pack Studio

    TechnicalSeptember 16, 2026

    Manufacturing-Ready Dunnage Geometry, From Hours To Seconds

    Pack Studio generates die-cut foam and foam insert CAD straight from the pack: DXF cut lines and STEP solids in a few clicks instead of hours of manual CAD work.

    Qiaodong Cui3 min read

  • Two tray types in Pack Studio 1.10: die-cut foam, and thermoformed plastic molded to the part contours

    Software Release NotesJuly 6, 2026

    Pack Studio 1.10 Software Release Notes

    Pack Studio 1.10 rebuilds Stacking, sizes boxes for you, adds Optimal orientation, two tray types, dunnage CAD export, wooden crates and an in-app User Guide.

    Jack Bernatchez3 min read

Machine viewWhat agents read

Loading…