---
title: "Part Orientation: Capability | Pack Studio User Guide"
url: "https://www.pack-studio.com/wiki/part-orientation"
description: "Orientation changes pack density. Pack Studio proposes stable, minimal and Optimal poses, packs and ranks each one, and accepts custom angles."
updated: "2026-11-17"
type: "TechArticle"
---

Capability /// User Guide

# Part Orientation

Orientation changes pack density. Pack Studio proposes stable, minimal and Optimal poses, packs and ranks each one, and accepts custom angles.

**Best for:** Parts where a small rotation unlocks a denser pack.

How a part is turned before it goes in the box decides how many fit. For a complex, organic or awkward part, the densest orientation is almost never the obvious one. Pack Studio proposes three kinds of pose and ranks every one on cost.

## Three kinds of pose

- **Stable:** the ways a part settles on a flat surface without tipping.
- **Minimal:** the axes of the tightest bounding box.
- **Optimal:** the engine searches all 3D rotations for the densest lattice. With Horizontal Nesting on, copies can interlock. Each candidate is costed with the same engine as a full analysis, so the winner is the least expensive to ship.

You can also add custom angles. Each pose is packed and ranked separately. Optimal works with [Planar Layering](https://www.pack-studio.com/wiki/planar-layering) and [Flexible Layering](https://www.pack-studio.com/wiki/flexible-layering), and [Stacking](https://www.pack-studio.com/wiki/stacking) adjusts orientation automatically.

## In the published study

Same regular slotted container (RSC) 12 × 12 × 8 in carton, single-wall C flute with an edge crush test (ECT) rating of 32, 48 × 40 in pallet, 53 ft dry van and freight:

| Part | Best hand-picked | Optimal | Cost per part |
|---|---|---|---|
| Plastic figurine, 0.1 lb | 33 per box, 33.9% density | 40 per box, 41.1% density | 23% lower[^1] |
| Steel pipe connector, 0.4 lb | 44 per box, 20.7% density | 54 per box, 25.4% density | 15% lower[^2] |

## Questions about Part Orientation

### What is the Optimal orientation?

A Part Orientation setting that searches the full space of 3D rotations for the pose in which copies of the part nest tightest, then costs each candidate so the winner is the least expensive to ship.

### How much does Optimal orientation save?

In the published study it fit about 20% more parts per carton and cut cost per part by 23% for a plastic figurine and 15% for a steel pipe connector, with nothing else changed.

## Related

- [Why teams use Part Orientation](https://www.pack-studio.com/features/part-orientation)
- [Planar Layering](https://www.pack-studio.com/wiki/planar-layering)
- [Flexible Layering](https://www.pack-studio.com/wiki/flexible-layering)
- [Nesting and Repacking](https://www.pack-studio.com/wiki/nesting-and-repacking)
- [Optimal Orientation: Packing Complex Parts at the Best Angle](https://www.pack-studio.com/post/optimal-orientation-packing-complex-parts-at-the-best-angle)
- [Pack Studio 1.10 Software Release Notes](https://www.pack-studio.com/post/pack-studio-1-10-software-release-notes)

[^1]: Cost per part, Optimal orientation versus best hand-picked orientation: 23% lower. RSC 12 × 12 × 8 in carton, single-wall C flute (ECT 32); Planar Layering with Horizontal Nesting; 48 × 40 in pallet; 53 ft dry van; freight $200 per delivery plus $2 per mile over 100 miles. Source: [Optimal Orientation: Packing Complex Parts at the Best Angle](https://www.pack-studio.com/post/optimal-orientation-packing-complex-parts-at-the-best-angle), 2026-08-07.
[^2]: Cost per part, Optimal orientation versus best of six hand-picked orientations: 15% lower. Same carton, pallet, truck and freight as the figurine study. Source: [Optimal Orientation: Packing Complex Parts at the Best Angle](https://www.pack-studio.com/post/optimal-orientation-packing-complex-parts-at-the-best-angle), 2026-08-07.
