---
title: "Flexible Layering: Packing Method | Pack Studio User Guide"
url: "https://www.pack-studio.com/wiki/flexible-layering"
description: "Flexible Layering builds a 3D lattice so parts interlock in every direction. Highest fill on awkward shapes, with a less uniform stack and more compute time."
updated: "2026-11-17"
type: "TechArticle"
---

Packing Method /// User Guide

# Flexible Layering

Flexible Layering builds a 3D lattice so parts interlock in every direction. Highest fill on awkward shapes, with a less uniform stack and more compute time.

**Best for:** Irregular, nestable parts where fill rate matters more than a uniform stack.

Flexible Layering builds a three-dimensional lattice. Instead of sitting in separable flat layers, parts interlock in every direction. It reaches the highest fill on awkward shapes, at the cost of a less uniform stack and more compute time.

## How it works

Pack Studio searches a lattice of positions and rotations so copies of the part interleave across all three axes. Every candidate lattice is costed with the same engine as a full analysis, so the option that ranks first is the one with the lowest cost per part, not just the densest geometry.

## When to use it

- Irregular, organic or nestable parts that waste space in a grid.
- Lanes where freight dominates and every extra part per truck counts.
- Packs unloaded by automation or dumped, where a uniform stack matters less.

## Settings

- **Part orientation:** stable, minimal or Optimal. Optimal is available on Flexible Layering and Planar Layering.
- **Nesting:** see [Nesting and Repacking](https://www.pack-studio.com/wiki/nesting-and-repacking).

## Compared with Stacking

For stamped parts that nest along one axis, Stacking can beat Flexible Layering. In the published stamped bracket study, Stacking fit 23 parts per carton against 14, for 33% lower[^1] cost per part. Run both and let the cost ranking decide.

## Questions about Flexible Layering

### What is the tradeoff with Flexible Layering?

It reaches the highest fill on awkward shapes, but the stack is less uniform than Planar Layering and the search takes more compute time.

## Related

- [Why teams use Flexible Layering](https://www.pack-studio.com/features/flexible-layering)
- [Planar Layering](https://www.pack-studio.com/wiki/planar-layering)
- [Stacking](https://www.pack-studio.com/wiki/stacking)
- [Part Orientation](https://www.pack-studio.com/wiki/part-orientation)
- [Nesting and Repacking](https://www.pack-studio.com/wiki/nesting-and-repacking)
- [Optimal Orientation: Packing Complex Parts at the Best Angle](https://www.pack-studio.com/post/optimal-orientation-packing-complex-parts-at-the-best-angle)
- [Stacking: Minimizing the Shipping Cost for Stamped Parts](https://www.pack-studio.com/post/stacking-minimizing-the-shipping-cost-for-stamped-parts)

[^1]: Cost per part, Stacking versus Flexible Layering: 33% lower. Same box and board grade. Source: [Stacking: Minimizing the Shipping Cost for Stamped Parts](https://www.pack-studio.com/post/stacking-minimizing-the-shipping-cost-for-stamped-parts), 2026-08-17.
