---
title: "User Guide & Wiki | Pack Studio Software"
url: "https://www.pack-studio.com/wiki"
description: "A guide to every Pack Studio capability: packing methods, protective packaging, and container options, ranked by cost-per-part and exportable as a PDF report."
updated: "2026-11-17"
type: "CollectionPage"
---

Software Wiki /// User Guide

# Pack Studio User Guide & Wiki

Every packing method, protective packaging type, container and capability in Pack Studio, with settings, best uses and published results. The same guide ships inside the app at Help > User Guide.

## Packing methods

- [Planar Layering](https://www.pack-studio.com/wiki/planar-layering): Planar Layering builds a box one flat layer at a time, each layer a grid stacked to the ceiling. Predictable, easy to unload by hand and simple to audit. Best for: Parts with a stable flat face that are picked layer by layer.
- [Flexible Layering](https://www.pack-studio.com/wiki/flexible-layering): Flexible Layering builds a 3D lattice so parts interlock in every direction. Highest fill on awkward shapes, with a less uniform stack and more compute time. Best for: Irregular, nestable parts where fill rate matters more than a uniform stack.
- [Stacking](https://www.pack-studio.com/wiki/stacking): Stacking fills nested columns of parts, upright or on their side, then tiles them across the box. Built for tubes, sleeves, cans and stamped sheet metal. Best for: Tubes, sleeves, cans and sheet metal that nest along one axis.
- [Compartment](https://www.pack-studio.com/wiki/compartment): Compartment packing places each part in its own rectangular cell, one per cell or two nested head to tail. The fastest method in Pack Studio. Best for: Fragile or finished parts that must not touch.
- [Bulk](https://www.pack-studio.com/wiki/bulk): Bulk packing runs a physics simulation that pours loose parts into a container and lets gravity, contact and friction settle them. Best for: Small loose parts that are dumped rather than placed.

## Protective packaging

- [Partitions](https://www.pack-studio.com/wiki/partitions): Partitions are cardboard or plastic dividers that wall off a cell for each part. Pack Studio sizes each cell to the pack and adds the dividers' cost and weight. Best for: Grid layouts where parts must not touch.
- [Foam Inserts](https://www.pack-studio.com/wiki/foam-inserts): Foam inserts are die-cut strips contoured to the parts in each row. Pack Studio draws them in 3D, adds cost and weight, and exports DXF and STEP. Best for: Finished or delicate parts that need a cushioned seat.
- [Molded Tray](https://www.pack-studio.com/wiki/molded-tray): A molded tray is a single contoured block with a cavity for each part. Pack Studio offers die-cut foam and thermoformed plastic trays and prices them per part. Best for: High-value parts that need a precise, presentation-grade fit.

## Containers

- [Expendable Cartons](https://www.pack-studio.com/wiki/expendable-cartons): Expendable cartons ship once. Pack Studio searches carton dimensions and proposes the lowest cost per part box for each pallet, sized to dunnage and weight limits. Best for: One-way shipments and high-mix, lower-volume launches.
- [Returnable Assets](https://www.pack-studio.com/wiki/returnable-assets): Returnable totes, bins, steel racks and crates each carry their own weight, crush strength and fleet economics. Pack Studio sizes the fleet and its payback. Best for: Steady lanes and high-volume programs with return logistics.

## Capabilities

- [Part Orientation](https://www.pack-studio.com/wiki/part-orientation): Orientation changes pack density. Pack Studio proposes stable, minimal and Optimal poses, packs and ranks each one, and accepts custom angles. Best for: Parts where a small rotation unlocks a denser pack.
- [Nesting and Repacking](https://www.pack-studio.com/wiki/nesting-and-repacking): Horizontal Nesting lets neighboring parts tuck into each other's concave features. Repacking fills leftover corners and headroom after the main pack. Best for: Concave parts such as brackets and L-shapes, and packs with spare corners.
- [Cost Per Part and ROI](https://www.pack-studio.com/wiki/cost-per-part-and-roi): Pack Studio reduces every option to one figure: box, protective packaging, pallet and freight divided across the parts on board. Returnables add a break-even period. Best for: Comparing packaging options on true landed cost.
- [Pack Reports](https://www.pack-studio.com/wiki/pack-reports): Every analysis ends in a one-sheet PDF covering the part, box, pallet, truck, protective packaging and full cost, with templates for each audience. Best for: Sharing a costed pack with customers or leadership.
