---
title: "Pack Studio Videos: Packing, Stacking and Dunnage"
url: "https://www.pack-studio.com/videos"
description: "Pack Studio product videos: Optimize Box, Optimal orientation, stacking stamped parts and door panels, and die-cut foam and foam insert CAD export."
updated: "2026-11-17"
type: "CollectionPage"
---

Videos

# Pack Studio Videos

Product clips from the Pack Studio technical studies. Most run at 2× speed.

## See Pack Studio work.

Every clip comes from a published technical study. Read the full studies on [Optimize Box](https://www.pack-studio.com/post/packaging-engineers-optimized-box-sizing-is-now-just-a-click-away-instead-of-a-guessing-game), [Optimal orientation](https://www.pack-studio.com/post/optimal-orientation-packing-complex-parts-at-the-best-angle), [Stacking](https://www.pack-studio.com/post/stacking-minimizing-the-shipping-cost-for-stamped-parts) and [dunnage CAD export](https://www.pack-studio.com/post/manufacturing-ready-dunnage-geometry-from-hours-to-seconds).

- [Optimize Box with a 2 lb part](https://video.wixstatic.com/video/90f3d1_87e33196a1cd43e7971a198ff68ff19b/1080p/mp4/file.mp4): At 2 lb the ergonomic weight cap engages and Optimize Box returns a taller carton holding twice the parts of the best stock size, 24% lower cost per part. Shown at 2× speed.
- [Optimize Box with a 0.4 lb part](https://video.wixstatic.com/video/90f3d1_c6ca2801ba484be387aaca7ab1fe59e1/1080p/mp4/file.mp4): The carton size sweep, the suggested box and the lower cost per part against the best of 41 stock cartons. Shown at 2× speed.
- [Nesting funnels with Optimize Box](https://video.wixstatic.com/video/90f3d1_423e311d03da443d92d375c1602988d5/720p/mp4/file.mp4): The footprint sweep for a self-nesting funnel and the long, shallow tray that holds 62% more parts than the best stock carton. Shown at 2× speed.
- [Optimal orientation: plastic figurine](https://video.wixstatic.com/video/90f3d1_d2024d3023164318b959ceea24125fd8/720p/mp4/file.mp4): The figurine packed into an RSC 12 × 12 × 8 in carton at the Optimal pose, compared with hand-picked minimal bounding box orientations, at 23% lower cost per part. Shown at 2× speed.
- [Optimal orientation: pipe connector](https://video.wixstatic.com/video/90f3d1_60997b3faefe4ed8bc5a82e96671c219/720p/mp4/file.mp4): A steel pipe connector packed at the Optimal pose in the same carton, at 15% lower cost per part than the best hand-picked orientation. Shown at 2× speed.
- [Stacking a stamped steel bracket](https://video.wixstatic.com/video/90f3d1_f9f7692851be425497f8b1dbe500dc6c/720p/mp4/file.mp4): Bracket packing and truck loadout, Flexible Layering versus Stacking: 23 parts per carton instead of 14.
- [Horizontal stacking of car door panels](https://video.wixstatic.com/video/90f3d1_c544b24af62046b2af17eeb8595878b0/720p/mp4/file.mp4): Door panels nested by Horizontal Stacking in a returnable rack: 134 panels instead of 75.
- [Die-cut foam pockets](https://video.wixstatic.com/video/90f3d1_8347b116a07544189e45a2639180b55c/480p/mp4/file.mp4): Parts lift out to reveal their die-cut foam pockets in Pack Studio.
- [Foam insert supports](https://video.wixstatic.com/video/90f3d1_7f9e54d97cc6480ba3ca86b088018e50/480p/mp4/file.mp4): Parts lift out to reveal their foam insert supports in Pack Studio.
- [Designing and exporting a die-cut foam tray](https://video.wixstatic.com/video/90f3d1_b5ac2533ea294b43b7e26ee7172a91ac/720p/mp4/file.mp4): Adding a die-cut foam tray, running the analysis, then exporting DXF and STEP.
- [Live dunnage parameters](https://video.wixstatic.com/video/90f3d1_b9d914ad5b144c8994e43dec7ca649b4/720p/mp4/file.mp4): Changing part foam clearance, base height and border margin, with the geometry regenerating immediately.
- [Exported DXF in LibreCAD](https://video.wixstatic.com/video/90f3d1_561ea6d55e0048849f9c9cb4b140c15f/720p/mp4/file.mp4): The exported DXF cut line opened in LibreCAD with fully editable outlines.
- [Die-cut foam STEP in Onshape](https://video.wixstatic.com/video/90f3d1_ced61a6569cc4ba39a8838b72aeef232/480p/mp4/file.mp4): The die-cut foam export opened in Onshape as a CAD solid with selectable boundary faces.
- [Foam inserts in Onshape](https://video.wixstatic.com/video/90f3d1_0ff2886e017e4bd981f90e0a9d78dbd6/480p/mp4/file.mp4): Foam inserts exported and opened in Onshape as solid CAD strips.
- [Pack Studio overview](https://video.wixstatic.com/video/90f3d1_a32177cc654a4c9a94efd1f8efd20b90/480p/mp4/file.mp4): Pack Studio packaging and pallet simulation overview from the legacy homepage.

## See it live on your part.

A demo runs on your own geometry.

[Book a Demo](https://www.pack-studio.com/contact) · [User Guide](https://www.pack-studio.com/wiki)
