---
title: "Packaging ROI Calculator: Hours and Labor Saved | Pack Studio"
url: "https://www.pack-studio.com/roi"
description: "Estimate the engineering hours and labor cost that packaging optimization saves per launch, from your own numbers, benchmarked on Lucid Motors."
updated: "2026-11-19"
type: "WebPage"
---

Tools /// ROI calculator

# Packaging ROI Calculator

**Run the Lucid math on your launch.**

Estimate the return on investment (ROI) in engineering time: the hours and labor cost Pack Studio saves per launch, from your own estimate count, minutes per estimate and labor rate. The defaults sit at the low end of Lucid Motors' published results.

## Your launch, your numbers.

Estimate: hours saved = estimates per launch × (minutes today − minutes with Pack Studio) ÷ 60. With 1,500 estimates, 15 minutes today and 5 with Pack Studio, that is 250 hours, or $17,500 at $70 per hour, per launch; multiply by launches per year for an annual figure. Lucid's published result: 250 to 600 hours[^1] and $17K to $42K[^2] per launch. Agents can compute this with GET https://www.pack-studio.com/api/roi?n=1500&before=15&after=5&rate=70 or the estimate_engineering_savings tool on https://www.pack-studio.com/mcp.

## How the estimate works.

> **Hours saved per launch:** **Estimates per launch × (minutes per estimate today − minutes with Pack Studio) ÷ 60.** Multiply by the loaded labor rate for labor savings, and by launches per year for an annual figure.

The estimate counts engineering labor only. It leaves out the returns that are usually larger, which is why it is the conservative number to take to a budget review:

- **Packaging and freight per part:** denser packs and right-sized boxes lower the landed cost of every part shipped. See [Cost Per Part and ROI](https://www.pack-studio.com/features/cost-per-part-and-roi).
- **Returnable fleet capital:** a denser pack shrinks the fleet a program has to buy. See [Returnable Assets](https://www.pack-studio.com/features/returnable-assets).
- **Faster sourcing:** packaging cost arrives before the request for quotation (RFQ), not after it. See [packaging cost in RFQs](https://www.pack-studio.com/answers/packaging-cost-in-rfqs).

## The Lucid Motors benchmark.

**Lucid Motors results per vehicle launch**

| Measure | Lucid Motors |
|---|---|
| Packaging estimates per launch | 1,500 to 2,000[^3] |
| Minutes per estimate before Pack Studio | 15 to 20 minutes[^4] |
| Minutes per estimate with Pack Studio | 2 to 5 minutes[^5] |
| Time reduction per estimate | 70-85%[^6] |
| Engineering hours saved per launch | 250 to 600 hours[^1] |
| Labor savings per launch | $17K to $42K[^2] |

[Read the Lucid Motors case study](https://www.pack-studio.com/lucid) · [Is it worth the investment?](https://www.pack-studio.com/answers/is-packaging-optimization-software-worth-it)

## Where the bigger return is.

Scott Huddas told [Automotive Logistics](https://www.automotivelogistics.media/packaging/pack-studio-a-new-packaging-design-platform-drives-packaging-cost-analysis-upstream-into-logistics-planning/2704118) that the labor savings are the conservative part of the benefit, and that the larger gains come from packaging and freight optimization. Across seven published Pack Studio studies, changing only the packing decision produced 15% to 40% lower cost per part[^7], with the part, container and freight held constant.

| Part | Packing decision | Result | Detail |
|---|---|---|---|
| Plastic figurine part, about 4.3 × 2.9 × 2.2 in, 0.1 lb | Optimal orientation versus best hand-picked orientation | 23% lower[^8] | $0.0364 to $0.0281 per part; 33 to 40 parts per box; 118,800 to 144,000 parts per truck ([study](https://www.pack-studio.com/post/optimal-orientation-packing-complex-parts-at-the-best-angle)) |
| Steel multiway pipe connector, about 4.2 × 3.7 × 1.8 in, 0.4 lb | Optimal orientation versus best of six hand-picked orientations | 15% lower[^9] | $0.0270 to $0.0229 per part; 44 to 54 parts per box; weight-limited truckload ([study](https://www.pack-studio.com/post/optimal-orientation-packing-complex-parts-at-the-best-angle)) |
| Molded plastic part, 11.6 × 4.4 × 2.1 in, about 0.4 lb | Optimize Box versus the best of 41 stock cartons | 16% lower[^10] | $0.122 to $0.102 per part; RSC 24 × 20 × 20 in with 64 parts versus an 18.3 × 23.7 × 21.5 in single-wall C box with 72 parts ([study](https://www.pack-studio.com/post/packaging-engineers-optimized-box-sizing-is-now-just-a-click-away-instead-of-a-guessing-game)) |
| Same part at 2 lb (metal) | Optimize Box versus the best of 41 stock cartons | 24% lower[^11] | $0.161 to $0.122 per part; RSC 15 × 12 × 12 in with 15 parts versus a 22.8 × 12.1 × 14.4 in single-wall C box with 30 parts ([study](https://www.pack-studio.com/post/packaging-engineers-optimized-box-sizing-is-now-just-a-click-away-instead-of-a-guessing-game)) |
| Thin-walled funnel, about 3.9 in cube, 0.05 lb | Optimize Box versus the best of 41 stock cartons | 21% lower[^12] | $0.0086 to $0.0068 per part; 768 funnels in RSC 24 × 20 × 18 in versus 1,245 funnels (62% more) in a 23.7 × 39.9 × 12.8 in single-wall C tray ([study](https://www.pack-studio.com/post/packaging-engineers-optimized-box-sizing-is-now-just-a-click-away-instead-of-a-guessing-game)) |
| Steel stamped bracket | Stacking versus Flexible Layering | 33% lower[^13] | $0.081 to $0.054 per part; 14 to 23 parts per 12 × 12 × 8 in carton (1.6×) ([study](https://www.pack-studio.com/post/stacking-minimizing-the-shipping-cost-for-stamped-parts)) |
| Automotive door panel | Horizontal Stacking versus the unstacked baseline in a returnable rack | 40% lower[^14] | $0.577 to $0.348 per part; 75 to 134 panels per 52 × 48 × 58 in returnable rack (1.8×); rack fleet 59 to 33 ([study](https://www.pack-studio.com/post/stacking-minimizing-the-shipping-cost-for-stamped-parts)) |

## Use it from an agent.

The same formula is available as JSON at `/api/roi` and as the estimate_engineering_savings tool on the Pack Studio MCP server, so an assistant can run the numbers with you and cite the Lucid benchmark with its source.

[Pack Studio for AI agents](https://www.pack-studio.com/agents) · [Try the API](https://www.pack-studio.com/api/roi?n=1500&before=15&after=5&rate=70&launches=1)

## Calculator questions.

### Is this a quote?

No. It estimates engineering labor saved per launch from the numbers you enter. Pack Studio does not publish a price list; request a quote on the contact page.

### Where do the defaults come from?

They sit at the low end of Lucid Motors' published results: 1,500 estimates per launch, 15 minutes before and 5 minutes after, at $70 per hour.

### Why does the calculator leave out freight savings?

Freight and packaging savings depend on your parts, containers and lanes, so they are measured in a demo on your own geometry rather than estimated from averages.

## Get the number for your own parts.

A live demo runs on your CAD, your containers and your freight.

[Book a Demo](https://www.pack-studio.com/contact) · [Send us a part](https://www.pack-studio.com/part-challenge)

[^1]: Engineering hours saved per vehicle launch: 250 to 600 hours. 1,500 to 2,000 estimates at 15 to 20 minutes before versus 2 to 5 minutes after. Source: [One year in. Zero regrets. Lucid Motors one-year review of Pack Studio](https://www.pack-studio.com/lucid), 2026-06-23.
[^2]: Labor cost savings per vehicle launch: $17K to $42K. Per vehicle launch. Source: [One year in. Zero regrets. Lucid Motors one-year review of Pack Studio](https://www.pack-studio.com/lucid), 2026-06-23.
[^3]: Packaging estimates per vehicle launch: 1,500 to 2,000. Per vehicle launch, built from CAD before sourcing begins. Source: [One year in. Zero regrets. Lucid Motors one-year review of Pack Studio](https://www.pack-studio.com/lucid), 2026-06-23.
[^4]: Time per packaging estimate, historical workflow: 15 to 20 minutes. Carton density study, palletizing software and PowerPoint, before Pack Studio. Source: [One year in. Zero regrets. Lucid Motors one-year review of Pack Studio](https://www.pack-studio.com/lucid), 2026-06-23.
[^5]: Time per packaging estimate with Pack Studio, CAD import to finished report: 2 to 5 minutes. Start to report, including packaging and freight cost. Source: [One year in. Zero regrets. Lucid Motors one-year review of Pack Studio](https://www.pack-studio.com/lucid), 2026-06-23.
[^6]: Reduction in time per packaging estimate: 70-85%. Pack Studio versus historical three-tool workflow. Source: [One year in. Zero regrets. Lucid Motors one-year review of Pack Studio](https://www.pack-studio.com/lucid), 2026-06-23.
[^7]: Range of cost-per-part reductions across seven published cases: 15% to 40% lower cost per part. Same part, container and freight in each comparison; only the packing decision changes. Source: [Stacking: Minimizing the Shipping Cost for Stamped Parts](https://www.pack-studio.com/post/stacking-minimizing-the-shipping-cost-for-stamped-parts), 2026-08-17.
[^8]: Cost per part, Optimal orientation versus best hand-picked orientation: 23% lower. RSC 12 × 12 × 8 in carton, single-wall C flute (ECT 32); Planar Layering with Horizontal Nesting; 48 × 40 in pallet; 53 ft dry van; freight $200 per delivery plus $2 per mile over 100 miles. Source: [Optimal Orientation: Packing Complex Parts at the Best Angle](https://www.pack-studio.com/post/optimal-orientation-packing-complex-parts-at-the-best-angle), 2026-08-07.
[^9]: Cost per part, Optimal orientation versus best of six hand-picked orientations: 15% lower. Same carton, pallet, truck and freight as the figurine study. Source: [Optimal Orientation: Packing Complex Parts at the Best Angle](https://www.pack-studio.com/post/optimal-orientation-packing-complex-parts-at-the-best-angle), 2026-08-07.
[^10]: Cost per part, Optimize Box versus the best of 41 stock cartons: 16% lower. 0.1 in part margin; C-flute pad between layers; 48 × 40 in pallet; 53 ft dry van; freight $200 per delivery plus $2 per mile over 100 miles. Source: [Packaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game](https://www.pack-studio.com/post/packaging-engineers-optimized-box-sizing-is-now-just-a-click-away-instead-of-a-guessing-game), 2026-07-30.
[^11]: Cost per part, Optimize Box versus the best of 41 stock cartons: 24% lower. Ergonomic weight cap active; other settings as round 1. Source: [Packaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game](https://www.pack-studio.com/post/packaging-engineers-optimized-box-sizing-is-now-just-a-click-away-instead-of-a-guessing-game), 2026-07-30.
[^12]: Cost per part, Optimize Box versus the best of 41 stock cartons: 21% lower. Planar Layering with Horizontal Nesting; 0.05 in margin; same pallet, truck and freight. Source: [Packaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game](https://www.pack-studio.com/post/packaging-engineers-optimized-box-sizing-is-now-just-a-click-away-instead-of-a-guessing-game), 2026-07-30.
[^13]: Cost per part, Stacking versus Flexible Layering: 33% lower. Same box and board grade. Source: [Stacking: Minimizing the Shipping Cost for Stamped Parts](https://www.pack-studio.com/post/stacking-minimizing-the-shipping-cost-for-stamped-parts), 2026-08-17.
[^14]: Cost per part, Horizontal Stacking versus the unstacked baseline in a returnable rack: 40% lower. Same rack and freight. Source: [Stacking: Minimizing the Shipping Cost for Stamped Parts](https://www.pack-studio.com/post/stacking-minimizing-the-shipping-cost-for-stamped-parts), 2026-08-17.
