---
title: "How Pack Studio Works: Part CAD to Landed Cost"
url: "https://www.pack-studio.com/how-it-works"
description: "How Pack Studio turns part CAD into ranked box, pallet and truck options: import, define standards, decide on cost per part, then share a one-page report."
updated: "2026-11-17"
type: "WebPage"
---

How it works

# How Pack Studio Works

**From part CAD to landed cost.**

Pack Studio goes from part CAD to box, pallet, container and truck layouts in under 90 seconds[^2], and from CAD import to a finished, costed report in 2 to 5 minutes[^3] at Lucid Motors. Here is what happens in between.

[Book a Demo](https://www.pack-studio.com/contact) · [See the features](https://www.pack-studio.com/features)

## Import. Define. Decide.

1. **Import the part.** Bring in part CAD directly, with no intermediate files, manual measurement or separate density studies. Before CAD exists, the Part Designer describes the part as a box, sphere or cylinder for quick concepting.
2. **Define the standards.** Choose a packing method, margins, protective packaging, ergonomic weight caps, pallets, trucks and freight rates. Save the setup as a packing environment and apply it to the next analysis in two clicks.
3. **Decide on cost per part.** Pack Studio generates options in seconds and ranks them by cost per part. Pick one, review it in 3D and send the one-page executive report.

## Six decisions, one optimization.

Packaging is more than geometry. Pack Studio solves orientation, packing, dunnage, palletization, truck loadout and cost together, so a change in one shows up in the answer.

1. **[Orient the part](https://www.pack-studio.com/wiki/part-orientation):** Stable, minimal and Optimal poses. Optimal searches all 3D rotations for the densest lattice.
2. **[Pack the container](https://www.pack-studio.com/wiki/planar-layering):** Five methods: Planar Layering, Flexible Layering, Stacking, Compartment and Bulk, with nesting and repacking.
3. **[Protect the parts](https://www.pack-studio.com/wiki/partitions):** Partitions, foam inserts, die-cut foam and thermoformed trays, each priced into the pack.
4. **[Build the unit load](https://www.pack-studio.com/features/pallet-optimization):** Variable-columnar pallet layouts, weight and stacking load, with board grade chosen to survive the stack.
5. **[Load the truck](https://www.pack-studio.com/features/truckload-optimization):** Pallets into trucks and containers such as a 53 ft dry van, limited by cube or by weight.
6. **[Rank on landed cost](https://www.pack-studio.com/wiki/cost-per-part-and-roi):** Box, protective packaging, pallet and freight divided across the parts on board.

## One number decides.

> **Cost per part:** **(box + protective packaging + pallet + freight) ÷ parts on board.** The lowest-cost option ranks first. For returnable fleets, the result adds a break-even period in months.

Freight is set as a cost per delivery plus a cost per mile, so a denser pack shows up directly as a lower cost per part. Packaging materials are priced from market pricing, and Pack Studio picks the lowest-cost corrugated board grade that survives the pallet-stack load.

## Set it once. Reuse it everywhere.

- **Packing method** and part orientation choices.
- **Margins** around each part and **dunnage allowances**.
- **Ergonomic weight caps** per box.
- **Palletization policy**, pallets and trucks.
- **Freight rates** per delivery and per mile.
- **Packing environments** that bundle all of the above as a reusable profile per customer or plant.

## Seconds to options. Minutes to report.

- **under 90 seconds[^2]**: Part CAD to box, pallet, container and truck layouts
- **2 to 5 minutes[^3]**: CAD import to finished report at Lucid Motors
- **15 to 20 minutes[^4]**: The same estimate in Lucid's previous three-tool workflow

## Workflow questions.

### How fast are Pack Studio simulations?

Pack Studio goes from part CAD to box, pallet, container and truck layouts in under 90 seconds[^2]. At Lucid Motors a complete estimate, from CAD import to finished report with packaging and freight cost, takes 2 to 5 minutes[^3], down from 15 to 20 minutes[^4].

### How does Pack Studio calculate cost per part?

Every option is reduced to one figure. Box, protective packaging, pallet and freight are summed and divided across the parts on board, so the lowest-cost option ranks first. For returnable fleets, the result is also expressed as a break-even period in months.

### What packing methods does Pack Studio support?

Five: [Planar Layering](https://www.pack-studio.com/wiki/planar-layering), [Flexible Layering](https://www.pack-studio.com/wiki/flexible-layering), [Stacking](https://www.pack-studio.com/wiki/stacking), [Compartment](https://www.pack-studio.com/wiki/compartment) and [Bulk](https://www.pack-studio.com/wiki/bulk). Each suits a different part shape, from flat-faced parts picked layer by layer to small loose parts settled by physics simulation.

### What outputs do I get?

Every run returns packaging options ranked by cost per part, with parts per box, pallet and truck, density and weight. Each analysis ends in a one-page executive PDF covering the part, box, pallet, truck, protective packaging and full cost, and the pack, box and dunnage can be exported as CAD.

## Bring a part. Leave with a ranked answer.

Book a live demo on your own geometry.

[Book a Demo](https://www.pack-studio.com/contact) · [Read the User Guide](https://www.pack-studio.com/wiki)

[^1]: Cost per part, Optimize Box versus the best of 41 stock cartons: 24% lower. Ergonomic weight cap active; other settings as round 1. Source: [Packaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game](https://www.pack-studio.com/post/packaging-engineers-optimized-box-sizing-is-now-just-a-click-away-instead-of-a-guessing-game), 2026-07-30.
[^2]: Time from part CAD to box, pallet, container and truck layout: under 90 seconds. Layout generation for one part across selected containers. Source: [One year in. Zero regrets. Lucid Motors one-year review of Pack Studio](https://www.pack-studio.com/lucid), 2026-06-23.
[^3]: Time per packaging estimate with Pack Studio, CAD import to finished report: 2 to 5 minutes. Start to report, including packaging and freight cost. Source: [One year in. Zero regrets. Lucid Motors one-year review of Pack Studio](https://www.pack-studio.com/lucid), 2026-06-23.
[^4]: Time per packaging estimate, historical workflow: 15 to 20 minutes. Carton density study, palletizing software and PowerPoint, before Pack Studio. Source: [One year in. Zero regrets. Lucid Motors one-year review of Pack Studio](https://www.pack-studio.com/lucid), 2026-06-23.
