---
title: "Packaging Optimization Glossary | Pack Studio"
url: "https://www.pack-studio.com/glossary"
description: "Definitions of packaging and logistics terms: total landed cost, dunnage, returnable packaging, RSC, ECT, unit load, nesting, spectral packing and more."
updated: "2026-11-17"
type: "WebPage"
---

Glossary

# Packaging Optimization Glossary

The terms behind packaging, palletization, freight and landed cost, as Pack Studio uses them.

**53 ft dry van**: The standard enclosed North American semi-trailer, about 53 feet long, used as the truck in Pack Studio's published studies.

**Board grade** (also Flute, Wall construction): The construction of corrugated board, such as single-wall C flute, double-wall or triple-wall. Pack Studio selects the lowest-cost grade that survives the pallet-stack load.

**Bounding box**: The smallest rectangular box that contains a part in a given orientation. Minimal orientations in Pack Studio are the axes of the tightest bounding box.

**Break-even period**: The number of months until the savings from reusing returnable packaging repay its upfront cost. Pack Studio reports it for returnable options.

**[Cost per part](https://www.pack-studio.com/glossary/cost-per-part)**: Pack Studio's ranking metric. Box, protective packaging, pallet and freight costs are summed and divided by the number of parts on board.

**[Cube utilization](https://www.pack-studio.com/glossary/cube-utilization)** (also cube utilisation, cube fill): The share of a container's, pallet's or trailer's internal volume that is actually filled by goods. Low cube utilization means paying to ship air.

**Die-cut foam tray**: A single foam block with a pocket cut for each part, used for finished or delicate parts.

**[Dunnage](https://www.pack-studio.com/glossary/dunnage)**: Material placed inside a container to position, separate and protect parts, such as partitions, foam inserts, molded trays and layer pads.

**DXF, STEP, STL, 3MF and OBJ**: CAD and mesh file formats Pack Studio exports. DXF carries 2D cut lines for die, waterjet, laser and router shops; STEP carries editable CAD solids; STL, 3MF and OBJ carry 3D meshes.

**Edge crush test (ECT)** (also ECT): A rating of corrugated board's edgewise compression strength, used to predict how much stacking load a box can carry. ECT 32 is a common single-wall rating.

**Expendable packaging** (also One-way packaging): Packaging used for a single shipment and then recycled or discarded, typically corrugated cartons. Best for one-way lanes and high-mix, lower-volume launches.

**Fast Fourier transform (FFT)** (also FFT): An algorithm that computes frequency-domain transforms quickly. In spectral packing it scores collisions and gaps for every candidate position of a part at once.

**Fleet sizing**: Calculating how many returnable containers a program needs to keep parts flowing, given volumes, transit times and return logistics.

**Flexible layering**: A packing method that builds a 3D lattice so parts interlock in every direction instead of sitting in separable layers.

**Foam insert**: A foam strip with a contour cut into the top so parts nest into it, often separating stacked rows.

**Interlocking-free packing**: A pack in which every part can be removed without breaking or deforming others, for example no parts hooked through each other like linked rings.

**ISTA and ASTM test protocols** (also ISTA, ASTM): Standard transit test procedures published by the International Safe Transit Association (ISTA) and ASTM International. Virtual ISTA/ASTM testing is on the Pack Studio roadmap.

**Make versus buy**: The decision to produce a component in-house or source it from a supplier. A full review weighs landed cost, not piece price alone.

**[Nesting](https://www.pack-studio.com/glossary/nesting)**: Arranging parts so that neighbors tuck into each other's concave features or hollow interiors, such as brackets, cones and stamped panels.

**Original equipment manufacturer (OEM)** (also OEM): The company that designs and assembles the final product, such as a vehicle maker, supplied by Tier 1 and Tier 2 suppliers.

**[Packing density](https://www.pack-studio.com/glossary/packing-density)** (also Cube utilization, Fill rate): The share of a container's volume occupied by parts. Higher density means more parts per box, pallet and truck, and a lower cost per part.

**[Part orientation](https://www.pack-studio.com/glossary/part-orientation)** (also Pose): How a part is rotated before it is packed. Pack Studio offers stable poses, minimal poses and an Optimal pose found by searching 3D rotations.

**Piece price**: The quoted unit cost of a component from a supplier, before packaging, logistics and quality costs. Comparing bids on piece price alone can hide larger downstream costs.

**Planar layering**: A packing method that builds a box one flat layer at a time, each layer a grid, stacked to the ceiling.

**Product lifecycle management (PLM)** (also PLM): Software and processes that manage a product's data from design through retirement. Packaging PLM is on the Pack Studio roadmap.

**Regular slotted container (RSC)** (also RSC): The most common corrugated box style, with four flaps of equal length on top and bottom. Pack Studio's stock catalog includes 41 RSC sizes.

**Request for quotation (RFQ)** (also RFQ): A sourcing document asking suppliers to bid on a part or service. Pack Studio lets bids be compared on landed cost.

**[Returnable packaging](https://www.pack-studio.com/glossary/returnable-packaging)** (also Returnable container, Reusable packaging): Durable containers such as plastic totes, bins, steel racks and crates that cycle between supplier and plant. They cost more up front and pay back through reuse on steady, high-volume lanes.

**[Scalable Spectral Packing (SSP)](https://www.pack-studio.com/glossary/ssp)** (also SSP, Spectral packing): The packing algorithm behind Pack Studio, developed by Inkbit and MIT researchers and published at SIGGRAPH 2023. It uses voxel grids and the fast Fourier transform to find dense, interlocking-free placements.

**Stacking**: A packing method that fills nested columns of parts, upright or on their side, then tiles the columns across the box.

**Thermoformed tray**: A plastic tray molded to the contours of the part. Pack Studio exports thermoformed trays as STL.

**[Total landed cost](https://www.pack-studio.com/glossary/total-landed-cost)** (also Landed cost, True landed cost): The full cost of getting a part to its point of use: piece price plus packaging, freight, warehousing, handling and the cost of damage, scrap and quality problems. Pack Studio ranks every packaging option by landed cost per part.

**[Unit load](https://www.pack-studio.com/glossary/unit-load)**: A group of cartons or containers assembled on a pallet or skid so it can be moved as one unit by a forklift or pallet jack.

**Voxel**: A volume element: one cell in a 3D grid, the 3D equivalent of a pixel. Spectral packing represents parts and containers as voxel grids.
