---
title: "Stacking: Nested Packing for Stamped Parts | Pack Studio"
url: "https://www.pack-studio.com/features/stacking"
description: "Stacking nests stamped parts, tubes and panels in columns, then tiles them across the box or rack. Published studies show 33% and 40% lower cost per part."
updated: "2026-11-19"
type: "WebPage"
---

Packing methods /// Available now

# Stacking

**Nest stamped parts. Ship fewer racks.**

Stacking fills nested columns of parts, upright or on their side, then tiles the columns across a carton or rack. In Pack Studio's published studies it left cost per part 33% lower[^1] for a steel bracket and 40% lower[^2] for a car door panel.

- **Best for:** Tubes, sleeves, cans and stamped sheet metal that nest along one axis.
- **Status:** Available now
- **You get:** Column layout per container, Parts per stack and per container, Rack fleet size

## Stamped parts ship a lot of air

Brackets, trays and panels are mostly empty space inside their bounding boxes. Packed one by one, they fill a box with air. Packed in nested columns, the same parts take a fraction of the volume. The hard part is working out the column, the tilt and the tiling for every part on a program.

## What Pack Studio does

Stacking builds a single nested column with as many parts as fit, upright or on its side, then tiles that column across the container. Release 1.10 rebuilt the column builder from the ground up: stacks run vertically or horizontally, orientation adjusts automatically, and you can cap parts per stack for handling or weight. Stacks work with partitions, layer dividers and molded trays, and every option is costed on box, dunnage, pallet and freight.

## What it changes

| Case | Container | Parts per container | Cost per part |
|---|---|---|---|
| Steel bracket | 12 × 12 × 8 in carton | 14 to 23 | 33% lower[^1] |
| Car door panel | 52 × 48 × 58 in returnable rack | 75 to 134 | 40% lower[^2] |

The door panel result also cut the returnable rack fleet from 59 racks to 33. The parts, containers and freight stayed the same. Only the stacking decision changed.

## Who uses it

Automotive and industrial packaging teams with stamped content, and any program where returnable racks are a capital decision made early with little data. See [Returnable Assets](https://www.pack-studio.com/features/returnable-assets) for fleet sizing and payback.

## Published results

- **Steel stamped bracket:** 33% lower[^1], cost per part, Stacking versus Flexible Layering. $0.081 to $0.054 per part; 14 to 23 parts per 12 × 12 × 8 in carton (1.6×)
- **Automotive door panel:** 40% lower[^2], cost per part, Horizontal Stacking versus the unstacked baseline in a returnable rack. $0.577 to $0.348 per part; 75 to 134 panels per 52 × 48 × 58 in returnable rack (1.8×); rack fleet 59 to 33

## Questions about Stacking

### Which parts are right for Stacking?

Parts that nest along one axis: stamped trays, brackets and panels, tubes, sleeves and cans. If a part is mostly empty space inside its bounding box but copies slide into each other, Stacking is worth a run.

### Can Stacking shrink a returnable fleet?

Yes. A denser rack means fewer racks for the same volume. In the published door panel study, Horizontal Stacking cut the fleet from 59 racks to 33.

## Related

- [Compartment](https://www.pack-studio.com/features/compartment): Compartment packing gives each part its own rectangular cell, one per cell or two nested head to tail, so finished parts never touch.
- [Flexible Layering](https://www.pack-studio.com/features/flexible-layering): Flexible Layering arranges copies of a part in a three-dimensional lattice, so they interlock across every axis instead of sitting in separate layers.
- [All Pack Studio features](https://www.pack-studio.com/features)
- [How to use Stacking](https://www.pack-studio.com/wiki/stacking)

Book a demo: https://www.pack-studio.com/contact

[^1]: Cost per part, Stacking versus Flexible Layering: 33% lower. Same box and board grade. Source: [Stacking: Minimizing the Shipping Cost for Stamped Parts](https://www.pack-studio.com/post/stacking-minimizing-the-shipping-cost-for-stamped-parts), 2026-08-17.
[^2]: Cost per part, Horizontal Stacking versus the unstacked baseline in a returnable rack: 40% lower. Same rack and freight. Source: [Stacking: Minimizing the Shipping Cost for Stamped Parts](https://www.pack-studio.com/post/stacking-minimizing-the-shipping-cost-for-stamped-parts), 2026-08-17.
