---
title: "Planar Layering: Layer-by-Layer Part Packing | Pack Studio"
url: "https://www.pack-studio.com/features/planar-layering"
description: "Planar Layering packs parts in flat, repeatable layers that operators unload by hand and auditors count at a glance, ranked on landed cost per part."
updated: "2026-11-19"
type: "WebPage"
---

Packing methods /// Available now

# Planar Layering

**Flat layers. Easy to unload.**

Planar Layering builds the pack one flat, repeatable layer at a time, so operators unload it by hand and quality teams count it at a glance. Pack Studio costs every layer pattern and ranks it on cost per part.

- **Best for:** Parts with a stable flat face that are picked layer by layer.
- **Status:** Available now
- **You get:** Layer pattern per container, Parts per layer, box, pallet and truck, Cost per part

## Why layers still win

Most packaging specifications are written in layers: so many parts per layer, so many layers per box. Operators pick that way, quality teams audit that way, and customers expect it. The question is never whether to layer. It is which pattern, which orientation and which box cost least once freight is counted.

## What Pack Studio does

Pack Studio lays out the first layer as a grid, repeats it up the container and stops at the height, margin or weight limit you set. Every candidate pattern is costed with the same engine as a full analysis: box, layer pads, pallet and freight divided across the parts on board. The pattern that ranks first is the least expensive to ship, not just the one that looks tidy.

Two settings push density further without giving up the uniform stack:

- **Horizontal Nesting** lets neighbors tuck into each other's concave features inside a layer.
- **Optimal orientation** searches 3D rotations for the pose that layers tightest.

## What it changes

Planar Layering was the packing method in Pack Studio's published Optimal orientation study. Holding the carton, pallet, truck and freight constant, letting the engine choose the pose left cost per part 23% lower[^1] for a plastic figurine and 15% lower[^2] for a steel pipe connector. In the box sizing study, Planar Layering with Horizontal Nesting fit 1,245 thin-walled funnels in an optimized tray against 768 in the best stock carton.

## Who uses it

Packaging engineers at original equipment manufacturers (OEMs) and suppliers who need a pack that a line operator can unload and a customer can audit, priced before the specification goes out. When fill rate matters more than a uniform stack, compare it with [Flexible Layering](https://www.pack-studio.com/features/flexible-layering) in the same run.

## Published results

- **Plastic figurine part, about 4.3 × 2.9 × 2.2 in, 0.1 lb:** 23% lower[^1], cost per part, Optimal orientation versus best hand-picked orientation. $0.0364 to $0.0281 per part; 33 to 40 parts per box; 118,800 to 144,000 parts per truck
- **Steel multiway pipe connector, about 4.2 × 3.7 × 1.8 in, 0.4 lb:** 15% lower[^2], cost per part, Optimal orientation versus best of six hand-picked orientations. $0.0270 to $0.0229 per part; 44 to 54 parts per box; weight-limited truckload
- **Thin-walled funnel, about 3.9 in cube, 0.05 lb:** 21% lower[^3], cost per part, Optimize Box versus the best of 41 stock cartons. $0.0086 to $0.0068 per part; 768 funnels in RSC 24 × 20 × 18 in versus 1,245 funnels (62% more) in a 23.7 × 39.9 × 12.8 in single-wall C tray

## Questions about Planar Layering

### Is Planar Layering always less dense than Flexible Layering?

No. With Horizontal Nesting on, parts tuck into each other inside a layer, so even a thin-walled funnel that fills about 7% of its bounding cube packs densely. Run both methods and let the cost ranking decide.

### Can the layers include separators?

Yes. Layer pads such as a corrugated C-flute sheet are added to the pack, to its weight and to its cost per part.

## Related

- [Flexible Layering](https://www.pack-studio.com/features/flexible-layering): Flexible Layering arranges copies of a part in a three-dimensional lattice, so they interlock across every axis instead of sitting in separate layers.
- [Bulk](https://www.pack-studio.com/features/bulk): Bulk packing runs a physics simulation that pours loose parts into a container and lets gravity, contact and friction settle them.
- [All Pack Studio features](https://www.pack-studio.com/features)
- [How to use Planar Layering](https://www.pack-studio.com/wiki/planar-layering)

Book a demo: https://www.pack-studio.com/contact

[^1]: Cost per part, Optimal orientation versus best hand-picked orientation: 23% lower. RSC 12 × 12 × 8 in carton, single-wall C flute (ECT 32); Planar Layering with Horizontal Nesting; 48 × 40 in pallet; 53 ft dry van; freight $200 per delivery plus $2 per mile over 100 miles. Source: [Optimal Orientation: Packing Complex Parts at the Best Angle](https://www.pack-studio.com/post/optimal-orientation-packing-complex-parts-at-the-best-angle), 2026-08-07.
[^2]: Cost per part, Optimal orientation versus best of six hand-picked orientations: 15% lower. Same carton, pallet, truck and freight as the figurine study. Source: [Optimal Orientation: Packing Complex Parts at the Best Angle](https://www.pack-studio.com/post/optimal-orientation-packing-complex-parts-at-the-best-angle), 2026-08-07.
[^3]: Cost per part, Optimize Box versus the best of 41 stock cartons: 21% lower. Planar Layering with Horizontal Nesting; 0.05 in margin; same pallet, truck and freight. Source: [Packaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game](https://www.pack-studio.com/post/packaging-engineers-optimized-box-sizing-is-now-just-a-click-away-instead-of-a-guessing-game), 2026-07-30.
