---
title: "Optimal Part Orientation for Dense Packing | Pack Studio"
url: "https://www.pack-studio.com/features/part-orientation"
description: "Pack Studio searches 3D rotations for the pose that packs densest and costs least, alongside stable and minimal poses, with published savings of 15% and 23%."
updated: "2026-11-19"
type: "WebPage"
---

Optimization /// Available now /// Release 1.10

# Part Orientation

**The densest pose is rarely obvious.**

Pack Studio proposes stable, minimal and Optimal poses for every part, packs each one and ranks them on cost per part. The Optimal pose comes from searching the full space of 3D rotations, and it is rarely the orientation a person would pick.

- **Best for:** Complex, organic or awkward parts where a small rotation unlocks a denser pack.
- **Status:** Available now, release 1.10
- **You get:** Stable, minimal and Optimal poses, Parts per box for each pose, Cost per part ranking

## The obvious pose leaves parts on the table

For a simple box-shaped part, orientation is easy. For a casting, a connector or a molded figure, the densest pose is almost never the one that looks natural, and testing rotations by hand is slow enough that most teams stop after two or three.

## What Pack Studio does

Pack Studio proposes three kinds of pose and ranks every one on cost:

- **Stable:** the ways a part rests on a flat surface without tipping.
- **Minimal:** the axes of the tightest bounding box.
- **Optimal:** the engine searches all 3D rotations for the densest lattice, with copies allowed to interlock when Horizontal Nesting is on.

Each candidate is costed with the same engine as a full analysis, so the winner is the least expensive to ship. The search runs on Pack Studio's own packing engine, Scalable Spectral Packing (SSP), published at SIGGRAPH 2023. Read [how it finds the best orientation](https://www.pack-studio.com/answers/best-orientation-for-packing-complex-parts).

## What it changes

In the published study, with the same carton, pallet, truck and freight, the Optimal pose fit about 20% more parts per carton and left cost per part 23% lower[^1] for a plastic figurine and 15% lower[^2] for a steel pipe connector.

## Who uses it

Engineers packing complex, organic or awkward parts, where hand-picked orientations leave density behind.

## Published results

- **Plastic figurine part, about 4.3 × 2.9 × 2.2 in, 0.1 lb:** 23% lower[^1], cost per part, Optimal orientation versus best hand-picked orientation. $0.0364 to $0.0281 per part; 33 to 40 parts per box; 118,800 to 144,000 parts per truck
- **Steel multiway pipe connector, about 4.2 × 3.7 × 1.8 in, 0.4 lb:** 15% lower[^2], cost per part, Optimal orientation versus best of six hand-picked orientations. $0.0270 to $0.0229 per part; 44 to 54 parts per box; weight-limited truckload

## Questions about Part Orientation

### Can I still choose the orientation myself?

Yes. Add custom angles alongside the stable, minimal and Optimal poses. Every pose is packed and ranked separately.

### Which packing methods support Optimal orientation?

Planar Layering and Flexible Layering. Stacking adjusts orientation automatically.

## Related

- [Nesting and Repacking](https://www.pack-studio.com/features/nesting-and-repacking): Horizontal Nesting lets neighboring parts tuck into each other's concave features, and Repacking fills the corners and headroom left after the main pack.
- [Optimize Box](https://www.pack-studio.com/features/optimize-box): Optimize Box searches a window of carton dimensions around your part, protective packaging, pallet and ergonomic limits, and returns the box with the lowest landed cost per part.
- [All Pack Studio features](https://www.pack-studio.com/features)
- [How to use Part Orientation](https://www.pack-studio.com/wiki/part-orientation)

Book a demo: https://www.pack-studio.com/contact

[^1]: Cost per part, Optimal orientation versus best hand-picked orientation: 23% lower. RSC 12 × 12 × 8 in carton, single-wall C flute (ECT 32); Planar Layering with Horizontal Nesting; 48 × 40 in pallet; 53 ft dry van; freight $200 per delivery plus $2 per mile over 100 miles. Source: [Optimal Orientation: Packing Complex Parts at the Best Angle](https://www.pack-studio.com/post/optimal-orientation-packing-complex-parts-at-the-best-angle), 2026-08-07.
[^2]: Cost per part, Optimal orientation versus best of six hand-picked orientations: 15% lower. Same carton, pallet, truck and freight as the figurine study. Source: [Optimal Orientation: Packing Complex Parts at the Best Angle](https://www.pack-studio.com/post/optimal-orientation-packing-complex-parts-at-the-best-angle), 2026-08-07.
