---
title: "Part Nesting and Repacking for Denser Packs | Pack Studio"
url: "https://www.pack-studio.com/features/nesting-and-repacking"
description: "Horizontal Nesting tucks concave parts into each other and Repacking fills leftover corners and headroom, recovering space a simple grid leaves empty."
updated: "2026-11-19"
type: "WebPage"
---

Optimization /// Available now

# Nesting and Repacking

**Fill the air you ship.**

Horizontal Nesting lets neighboring parts tuck into each other's concave features, and Repacking fills the corners and headroom left after the main pack. Together they recover space that a simple grid ships as air.

- **Best for:** Concave parts such as brackets, cones and L-shapes, and packs with spare corners.
- **Status:** Available now
- **You get:** Nested layouts, Extra parts per container, Cost per part

## Bounding boxes hide free space

A thin-walled funnel fills only about 7% of its bounding cube. Pack it as if it were a cube and you ship more than nine parts' worth of air for every funnel. Brackets, cones and L-shapes behave the same way.

## What Pack Studio does

Two capabilities recover that space:

- **Horizontal Nesting** lets neighboring parts tuck into each other's concave features, within a layer or across a lattice.
- **Repacking** runs after the main pack and fills leftover corners and the headroom above the top layer with additional parts, so the last few percent of the container are not wasted.

Both feed the same cost model, so extra parts per container show up directly as a lower cost per part.

## What it changes

In the published box sizing study, Planar Layering with Horizontal Nesting fit 1,245 funnels in an optimized tray against 768 in the best stock carton, at 21% lower[^1] cost per part.

## Who uses it

Teams shipping self-nesting and concave parts, and anyone whose packs leave visible corners empty. Pair it with [Part Orientation](https://www.pack-studio.com/features/part-orientation) for parts that interlock only at the right angle.

## Published results

- **Thin-walled funnel, about 3.9 in cube, 0.05 lb:** 21% lower[^1], cost per part, Optimize Box versus the best of 41 stock cartons. $0.0086 to $0.0068 per part; 768 funnels in RSC 24 × 20 × 18 in versus 1,245 funnels (62% more) in a 23.7 × 39.9 × 12.8 in single-wall C tray

## Questions about Nesting and Repacking

### Which parts benefit most from nesting?

Parts that are mostly empty inside their bounding boxes: brackets, L-shapes, cones, cups and funnels.

### Does Repacking change the main layout?

No. It runs after the main pack and adds parts to the leftover corners and the headroom above the top layer.

## Related

- [Optimize Box](https://www.pack-studio.com/features/optimize-box): Optimize Box searches a window of carton dimensions around your part, protective packaging, pallet and ergonomic limits, and returns the box with the lowest landed cost per part.
- [Part Orientation](https://www.pack-studio.com/features/part-orientation): Pack Studio proposes stable, minimal and Optimal poses for every part, packs each one and ranks them on cost per part.
- [All Pack Studio features](https://www.pack-studio.com/features)
- [How to use Nesting and Repacking](https://www.pack-studio.com/wiki/nesting-and-repacking)

Book a demo: https://www.pack-studio.com/contact

[^1]: Cost per part, Optimize Box versus the best of 41 stock cartons: 21% lower. Planar Layering with Horizontal Nesting; 0.05 in margin; same pallet, truck and freight. Source: [Packaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game](https://www.pack-studio.com/post/packaging-engineers-optimized-box-sizing-is-now-just-a-click-away-instead-of-a-guessing-game), 2026-07-30.
