---
title: "Foam Insert Design with DXF and STEP Export | Pack Studio"
url: "https://www.pack-studio.com/features/foam-inserts"
description: "Pack Studio contours foam inserts to the parts in each row, prices them per part and exports DXF cut lines and STEP solids for any foam converter or CAD system."
updated: "2026-11-19"
type: "WebPage"
---

Dunnage and protection /// Available now

# Foam Inserts

**Contoured foam, straight to CAD.**

Pack Studio contours foam inserts to the actual parts in each row, at their packed positions, and adds their cost and weight to the shipment. Each insert exports as DXF cut lines and STEP solids, ready for a converter or a CAD system.

- **Best for:** Finished or delicate parts that need a cushioned seat.
- **Status:** Available now
- **You get:** Contoured insert geometry, DXF cut lines, STEP solids, Cost and weight per part

## Foam design used to take hours

The traditional route: export the packed parts, rebuild the arrangement in CAD, model foam around it by hand, then send drawings to a converter. Hours of work per part, repeated every time the pack changes.

## What Pack Studio does

Pack Studio profiles each foam strip to the actual parts in its row, at their packed positions, so every part drops in at the correct angle without being trapped. It extrudes each profile into a solid strip, draws it in 3D and adds its cost and weight to the shipment.

When the design is right, it exports straight to manufacturing:

- **DXF** cut lines for any die, waterjet, laser or CNC router shop, built from line segments and circular arcs a shop can measure and edit.
- **STEP** solids with editable faces and edges for any CAD system.

Clearance and border margin are adjustable, and the geometry regenerates in seconds as settings change.

## Who uses it

Teams shipping finished or delicate parts in stacked rows, and packaging suppliers who want to quote foam from the customer's own geometry. For a single foam block with a pocket per part, see [Die-Cut Foam Trays](https://www.pack-studio.com/features/die-cut-foam-trays).

## Questions about Foam Inserts

### Who can cut the exported inserts?

Any die, waterjet, laser or CNC router shop can work from the DXF cut lines, which are built from editable line segments and arcs. The STEP solids open in any CAD system.

### Do I have to rebuild the arrangement in CAD?

No. The profiles are traced at the positions Pack Studio already chose and costed, so the foam matches the reviewed layout.

## Related

- [Molded Tray](https://www.pack-studio.com/features/molded-tray): A molded tray holds every part in its own cavity, traced from the part's true geometry at the exact packed position.
- [Partitions](https://www.pack-studio.com/features/partitions): Pack Studio generates a divider set sized to the actual pack, so every part gets its own walled cell.
- [All Pack Studio features](https://www.pack-studio.com/features)
- [How to use Foam Inserts](https://www.pack-studio.com/wiki/foam-inserts)

Book a demo: https://www.pack-studio.com/contact
