---
title: "Expendable Carton Optimization Software | Pack Studio"
url: "https://www.pack-studio.com/features/expendable-cartons"
description: "Pack Studio sizes one-way corrugated cartons around the part, picks the lowest-cost board grade that survives the stack, and ranks every option on cost per part."
updated: "2026-11-19"
type: "WebPage"
---

Containers and loads /// Available now

# Expendable Cartons

**Ship once. Spend less doing it.**

Expendable cartons ship once, so every square foot of board and every empty corner is paid for and never recovered. Pack Studio sizes the carton around the part, picks the lowest-cost board grade that survives the pallet stack and ranks each option on cost per part.

- **Best for:** One-way shipments and high-mix, lower-volume launches.
- **Status:** Available now
- **You get:** Carton dimensions, Board grade, Cost per part

## Catalog boxes leave money on the table

Most cartons are picked from a catalog because one feels right for the part. The catalog box is rarely the cost-optimal one: too much board, too much air, or a weight that tips past an ergonomic limit. On a one-way lane you pay for that choice on every shipment.

## What Pack Studio does

Pack Studio evaluates cartons against the part, the protective packaging, the pallet and the freight together. It searches carton dimensions with [Optimize Box](https://www.pack-studio.com/features/optimize-box), compares them with the 41[^2] built-in stock regular slotted container (RSC) sizes, and chooses the board for you: for each candidate, the lowest-cost corrugated grade that survives the pallet-stack load and meets a minimum strength floor for the box size.

## What it changes

In Pack Studio's published box sizing study, with the same part, pallet and freight:

- A 0.4 lb molded part shipped at 16% lower[^3] cost per part than in the best stock carton.
- The same part at 2 lb shipped at 24% lower[^4] cost per part, in a taller box holding twice the parts.

## Who uses it

Teams on one-way lanes, high-mix launches and export programs, and packaging producers who want to show a customer the cost of each carton option. When the lane is steady and returns are possible, compare against [Returnable Assets](https://www.pack-studio.com/features/returnable-assets) in the same run.

## Published results

- **Molded plastic part, 11.6 × 4.4 × 2.1 in, about 0.4 lb:** 16% lower[^3], cost per part, Optimize Box versus the best of 41 stock cartons. $0.122 to $0.102 per part; RSC 24 × 20 × 20 in with 64 parts versus an 18.3 × 23.7 × 21.5 in single-wall C box with 72 parts
- **Same part at 2 lb (metal):** 24% lower[^4], cost per part, Optimize Box versus the best of 41 stock cartons. $0.161 to $0.122 per part; RSC 15 × 12 × 12 in with 15 parts versus a 22.8 × 12.1 × 14.4 in single-wall C box with 30 parts

## Questions about Expendable Cartons

### How does Pack Studio choose the board grade?

For each candidate box it selects the lowest-cost corrugated grade that survives the pallet-stack load and meets a minimum strength floor for the box size. Larger boxes move to double- or triple-wall automatically.

### Where do the corrugated prices come from?

Pack Studio prices packaging materials from market pricing. Corrugated estimates use live raw material prices for linerboard, corrugating medium, foams and coatings[^1].

## Related

- [Returnable Assets](https://www.pack-studio.com/features/returnable-assets): Pack Studio sizes the returnable fleet a program needs, from totes and bins to steel racks and wooden crates, and calculates the months until reuse savings repay the investment.
- [Truckload Optimization](https://www.pack-studio.com/features/truckload-optimization): Pack Studio loads pallets into trucks and shipping containers, such as a 53 ft dry van, and shows parts per truck and whether the load is limited by cube or by weight.
- [All Pack Studio features](https://www.pack-studio.com/features)
- [How to use Expendable Cartons](https://www.pack-studio.com/wiki/expendable-cartons)

Book a demo: https://www.pack-studio.com/contact

[^1]: Pricing inputs: live raw material prices for linerboard, corrugating medium, foams and coatings. 2026 development. Source: [Pack Studio, a new packaging design platform, drives packaging cost analysis upstream into logistics planning](https://www.automotivelogistics.media/packaging/pack-studio-a-new-packaging-design-platform-drives-packaging-cost-analysis-upstream-into-logistics-planning/2704118), 2026-07-27.
[^2]: Built-in stock carton sizes (regular slotted containers): 41. Stock catalog used for comparisons. Source: [Packaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game](https://www.pack-studio.com/post/packaging-engineers-optimized-box-sizing-is-now-just-a-click-away-instead-of-a-guessing-game), 2026-07-30.
[^3]: Cost per part, Optimize Box versus the best of 41 stock cartons: 16% lower. 0.1 in part margin; C-flute pad between layers; 48 × 40 in pallet; 53 ft dry van; freight $200 per delivery plus $2 per mile over 100 miles. Source: [Packaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game](https://www.pack-studio.com/post/packaging-engineers-optimized-box-sizing-is-now-just-a-click-away-instead-of-a-guessing-game), 2026-07-30.
[^4]: Cost per part, Optimize Box versus the best of 41 stock cartons: 24% lower. Ergonomic weight cap active; other settings as round 1. Source: [Packaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game](https://www.pack-studio.com/post/packaging-engineers-optimized-box-sizing-is-now-just-a-click-away-instead-of-a-guessing-game), 2026-07-30.
