---
title: "Pack Studio Features: Packaging Optimization Software"
url: "https://www.pack-studio.com/features"
description: "Every Pack Studio feature with its own page: five packing methods, dunnage design, cartons, returnables, pallets, trucks, cost per part and reports."
updated: "2026-11-19"
type: "CollectionPage"
---

Features

# Pack Studio Features

**Every feature ends in cost per part.**

Twenty features, each with its own page, from five packing methods to manufacturing-ready dunnage CAD. Every one feeds the same ranked answer: true landed cost per part across box, protective packaging, pallet and freight.

[Book a Demo](https://www.pack-studio.com/contact) · [Browse the answers](https://www.pack-studio.com/answers)

## Twenty features. One ranked answer.

Pick a feature for the problem it solves, its published results and how to use it.

### Packing methods

- [Planar Layering](https://www.pack-studio.com/features/planar-layering): Flat layers. Easy to unload. Planar Layering builds the pack one flat, repeatable layer at a time, so operators unload it by hand and quality teams count it at a glance.
- [Flexible Layering](https://www.pack-studio.com/features/flexible-layering): Interlock in every direction. Flexible Layering arranges copies of a part in a three-dimensional lattice, so they interlock across every axis instead of sitting in separate layers.
- [Stacking](https://www.pack-studio.com/features/stacking): Nest stamped parts. Ship fewer racks. Stacking fills nested columns of parts, upright or on their side, then tiles the columns across a carton or rack.
- [Compartment](https://www.pack-studio.com/features/compartment): One cell per part. Zero contact. Compartment packing gives each part its own rectangular cell, one per cell or two nested head to tail, so finished parts never touch.
- [Bulk](https://www.pack-studio.com/features/bulk): Pour, settle, count, cost. Bulk packing runs a physics simulation that pours loose parts into a container and lets gravity, contact and friction settle them.

### Dunnage and protection

- [Partitions](https://www.pack-studio.com/features/partitions): Dividers sized to the pack. Pack Studio generates a divider set sized to the actual pack, so every part gets its own walled cell.
- [Foam Inserts](https://www.pack-studio.com/features/foam-inserts): Contoured foam, straight to CAD. Pack Studio contours foam inserts to the actual parts in each row, at their packed positions, and adds their cost and weight to the shipment.
- [Molded Tray](https://www.pack-studio.com/features/molded-tray): A pocket for every part. A molded tray holds every part in its own cavity, traced from the part's true geometry at the exact packed position.
- [Dunnage Designer](https://www.pack-studio.com/features/dunnage-designer): Dunnage designed in seconds, not hours. Pack Studio generates manufacturing-ready dunnage straight from the optimized pack: die-cut foam trays, foam inserts and thermoformed plastic trays.
- [Die-Cut Foam Trays](https://www.pack-studio.com/features/die-cut-foam-trays): Pockets traced from real geometry. Pack Studio designs die-cut foam trays with a pocket for every part, traced from the part's true geometry at its packed position.

### Containers and loads

- [Expendable Cartons](https://www.pack-studio.com/features/expendable-cartons): Ship once. Spend less doing it. Expendable cartons ship once, so every square foot of board and every empty corner is paid for and never recovered.
- [Returnable Assets](https://www.pack-studio.com/features/returnable-assets): Size the fleet. Know the payback. Pack Studio sizes the returnable fleet a program needs, from totes and bins to steel racks and wooden crates, and calculates the months until reuse savings repay the investment.
- [Pallet Optimization](https://www.pack-studio.com/features/pallet-optimization): Every pallet pattern, costed. Pack Studio builds each palletized unit load from the packed carton: parts per layer and per pallet, footprint, weight against ergonomic and load limits, and the stacking load each carton must carry.
- [Truckload Optimization](https://www.pack-studio.com/features/truckload-optimization): More parts per truck. Less freight. Pack Studio loads pallets into trucks and shipping containers, such as a 53 ft dry van, and shows parts per truck and whether the load is limited by cube or by weight.

### Optimization

- [Part Orientation](https://www.pack-studio.com/features/part-orientation): The densest pose is rarely obvious. Pack Studio proposes stable, minimal and Optimal poses for every part, packs each one and ranks them on cost per part.
- [Nesting and Repacking](https://www.pack-studio.com/features/nesting-and-repacking): Fill the air you ship. Horizontal Nesting lets neighboring parts tuck into each other's concave features, and Repacking fills the corners and headroom left after the main pack.
- [Optimize Box](https://www.pack-studio.com/features/optimize-box): The cost-optimal box, found for you. Optimize Box searches a window of carton dimensions around your part, protective packaging, pallet and ergonomic limits, and returns the box with the lowest landed cost per part.

### Cost and reporting

- [Cost Per Part and ROI](https://www.pack-studio.com/features/cost-per-part-and-roi): One number decides. Pack Studio reduces every packaging option to one figure: box, protective packaging, pallet and freight divided across the parts on board.
- [Pack Reports](https://www.pack-studio.com/features/pack-reports): One click. One page. Any audience. Every Pack Studio analysis ends in a one-page PDF covering the part, box, pallet, truck, protective packaging and full cost.

### Coming soon

- [Agentic Pack Studio](https://www.pack-studio.com/features/agentic-pack-studio): The agent drafts. You approve. Agentic Pack Studio is an agent that drafts packaging concepts and saves them as standard Pack Studio projects, which you adjust and approve.

## The twelve capabilities in release 1.10.

The official capability list behind the feature pages above.

- [Automated Pack Design by Part Orientation](https://www.pack-studio.com/features/part-orientation): Pack Studio proposes stable poses, where the part rests without tipping, minimal poses with the tightest bounding box, and an Optimal pose it finds by searching 3D rotations.
- [Multi-Box & Orientation Comparison](https://www.pack-studio.com/features/optimize-box): Run one part against stock cartons and orientations at once, or let Optimize Box search a window of carton dimensions for the lowest landed cost per part.
- [Instant Packaging Cost Estimation](https://www.pack-studio.com/features/cost-per-part-and-roi): Every option is costed as it is generated: carton, board grade, protective packaging and pallet.
- [Unit Load Dynamics Calculation](https://www.pack-studio.com/features/pallet-optimization): Pack Studio works out each palletized unit load: parts per layer and per pallet, footprint, weight against ergonomic and load limits, and the stacking load each carton must carry.
- [Truck & Container Loadout Simulation](https://www.pack-studio.com/features/truckload-optimization): Pallets are loaded into trucks and shipping containers, such as a 53 ft dry van, to show parts per truck and whether the load is limited by cube or by weight.
- [Logistics Cost Integration](https://www.pack-studio.com/features/truckload-optimization): Freight is part of every result.
- [Returnable Packaging Fleet Calculator](https://www.pack-studio.com/features/returnable-assets): For totes, bins, steel racks and crates, Pack Studio sizes the fleet a program needs.
- [Returnable Packaging ROI Calculation](https://www.pack-studio.com/features/returnable-assets): Compares returnable and expendable packaging and reports the return on investment (ROI) as a break-even period: the number of months until reuse savings repay the upfront cost of the fleet.
- [PKG to PKG Performance Comparison](https://www.pack-studio.com/features/cost-per-part-and-roi): Put packaging options side by side on the same part, pallet and freight: parts per box, pallet and truck, density, weight and cost per part, ranked from lowest cost.
- [One-Page Executive Report](https://www.pack-studio.com/features/pack-reports): Each analysis ends in a one-sheet PDF covering the part, box, pallet, truck, protective packaging and full cost.
- [Dunnage Visualization](https://www.pack-studio.com/features/dunnage-designer): See partitions, foam inserts and trays in 3D around the packed parts.
- [Automated Dunnage Designer](https://www.pack-studio.com/features/dunnage-designer): Generates manufacturing-ready die-cut foam trays, foam inserts and thermoformed plastic trays from the pack.

## What every analysis returns.

**Pack Studio outputs and formats**

| Output | What it contains | Format |
|---|---|---|
| Ranked options | Every packaging option with parts per box, pallet and truck, density, weight and cost per part | In app |
| Executive report | One-sheet summary of the part, box, pallet, truck, protective packaging and full cost | PDF |
| Pack geometry | The current pack, with parts, box and dunnage available separately | 3MF, STL, OBJ |
| Foam dunnage | Die-cut foam trays and foam inserts as cut lines and editable solids | DXF, STEP |
| Thermoformed trays | Plastic trays molded to the part contours | STL |

## Nine features in development.

These capabilities are in development. Timing is not committed; ask in a demo about early access.

- [Sustainability & CO2 Impact Metrics](https://www.pack-studio.com/features#sustainability-metrics)
- [Virtual ISTA/ASTM Testing](https://www.pack-studio.com/features#virtual-testing): Refers to International Safe Transit Association (ISTA) and ASTM International test protocols.
- [Specification Management](https://www.pack-studio.com/features#spec-management)
- [Part Variant Overlay](https://www.pack-studio.com/features#part-variant-overlay)
- [Market Forecasting](https://www.pack-studio.com/features#market-forecasting)
- [Packaging PLM](https://www.pack-studio.com/features#packaging-plm): PLM stands for product lifecycle management.
- [Parametric Rack Models](https://www.pack-studio.com/features#parametric-racks)
- [Packaging Score](https://www.pack-studio.com/features#packaging-score)
- [Partner-Led Improvements](https://www.pack-studio.com/features#partner-improvements)

## Feature questions.

### What file types and containers are supported?

Pack Studio imports part CAD directly, and the Part Designer describes a part as a box, sphere or cylinder when no CAD model exists yet. Containers include expendable corrugated cartons, plastic totes and bins, steel racks, crates and wooden crates on an integrated skid, loaded onto pallets and into trucks or shipping containers. Packs export to 3MF, STL and OBJ; die-cut foam and foam inserts export to STEP and DXF; thermoformed trays export to STL.

### Can Pack Studio size a box for me?

Yes. Optimize Box, added in release 1.10, searches a window of carton dimensions using your packing method, margins, dunnage, ergonomic weight caps and pallet policy, and returns the box with the lowest landed cost per part for each selected pallet. In the published study it beat the best of 41[^2] stock cartons by 16% lower[^3] for a 0.4 lb part and 24% lower[^4] for a 2 lb part.

### Does Pack Studio work for returnable packaging?

Yes. Totes, bins, steel racks and crates each carry their own weight, crush strength and fleet economics. Pack Studio sizes the fleet and calculates the months until reuse savings repay the upfront cost. See [Returnable Assets](https://www.pack-studio.com/wiki/returnable-assets).

### Can I export dunnage to CAD?

Yes. Die-cut foam trays and foam inserts export as DXF cut lines for die, waterjet, laser or CNC router shops and as STEP solids for any CAD system. Thermoformed plastic trays export as STL. Pocket clearance, base height and border margin are adjustable, and the geometry regenerates in seconds.

### Where do the corrugated cost estimations come from?

Pack Studio uses market pricing for packaging materials to cost boxes and some dunnage. For each candidate box it selects the lowest-cost corrugated board grade that survives the pallet-stack load and meets a minimum strength floor for the box size, moving larger boxes to double- or triple-wall automatically.

## See every feature on your own part.

A live demo runs on your geometry, your containers and your freight.

[Book a Demo](https://www.pack-studio.com/contact) · [How it works](https://www.pack-studio.com/how-it-works)

[^1]: Current major release: 1.10. Released July 2026. Source: [Pack Studio 1.10 Software Release Notes](https://www.pack-studio.com/post/pack-studio-1-10-software-release-notes), 2026-07-06.
[^2]: Built-in stock carton sizes (regular slotted containers): 41. Stock catalog used for comparisons. Source: [Packaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game](https://www.pack-studio.com/post/packaging-engineers-optimized-box-sizing-is-now-just-a-click-away-instead-of-a-guessing-game), 2026-07-30.
[^3]: Cost per part, Optimize Box versus the best of 41 stock cartons: 16% lower. 0.1 in part margin; C-flute pad between layers; 48 × 40 in pallet; 53 ft dry van; freight $200 per delivery plus $2 per mile over 100 miles. Source: [Packaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game](https://www.pack-studio.com/post/packaging-engineers-optimized-box-sizing-is-now-just-a-click-away-instead-of-a-guessing-game), 2026-07-30.
[^4]: Cost per part, Optimize Box versus the best of 41 stock cartons: 24% lower. Ergonomic weight cap active; other settings as round 1. Source: [Packaging Engineers: Optimized Box Sizing is Now Just a Click Away Instead of a Guessing Game](https://www.pack-studio.com/post/packaging-engineers-optimized-box-sizing-is-now-just-a-click-away-instead-of-a-guessing-game), 2026-07-30.
