---
title: "Is Packaging Optimization Software Worth It? | Pack Studio"
url: "https://www.pack-studio.com/answers/is-packaging-optimization-software-worth-it"
description: "How to judge the payback of packaging optimization software: engineering hours, packaging and freight per part, and returnable fleets, with Lucid Motors' results."
updated: "2026-11-19"
type: "WebPage"
---

Answers /// Deciding

# Is packaging optimization software worth the investment?

**Short answer:** It is worth it when the hours and freight it saves outweigh its cost, and the engineering time alone often settles that. Lucid Motors saved 250 to 600 hours[^1], or $17K to $42K[^2] in labor, per vehicle launch, before counting packaging and freight savings.

Updated November 19, 2026

## Three places the return comes from

1. **Engineering time.** Fewer hours per estimate, multiplied by estimates per launch and launches per year.
2. **Packaging and freight per part.** Denser packs and right-sized boxes lower the landed cost of every part shipped, for the life of the program.
3. **Capital.** Denser returnables shrink the fleet a program has to buy.

## Start with the hours

Engineering time is the easiest return to measure, and the most conservative. Lucid Motors measured 15 to 20 minutes[^3] per estimate before Pack Studio and 2 to 5 minutes[^4] after, across 1,500 to 2,000[^5] estimates per launch. That is 250 to 600 hours[^1] and $17K to $42K[^2] per launch. Scott Huddas told [Automotive Logistics](https://www.automotivelogistics.media/packaging/pack-studio-a-new-packaging-design-platform-drives-packaging-cost-analysis-upstream-into-logistics-planning/2704118) that the labor savings are the conservative part of the benefit, and that the larger gains come from packaging and freight optimization.

Use the [ROI calculator](https://www.pack-studio.com/roi) with your own estimate count, minutes and labor rate.

## Then count the freight

Across seven published Pack Studio studies, changing only the packing decision produced 15% to 40% lower cost per part[^6], with the part, container and freight held constant. On a high-volume lane, a few cents per part repeats on every shipment.

## And the fleet

In the published door panel study, a denser stack cut a returnable rack fleet from 59 racks to 33. See [Returnable Assets](https://www.pack-studio.com/features/returnable-assets).

## What about price?

Pack Studio does not publish a price list. [Request a quote](https://www.pack-studio.com/contact) and bring a part, so the payback is estimated on your own geometry.

## The numbers behind this answer

- **Lucid Motors:** 250 to 600 hours[^1], Engineering hours saved per vehicle launch
- **Lucid Motors:** $17K to $42K[^2], Labor cost savings per vehicle launch
- **Pack Studio published technical studies:** 15% to 40% lower cost per part[^6], Range of cost-per-part reductions across seven published cases

## The features behind this answer

- [Cost Per Part and ROI](https://www.pack-studio.com/features/cost-per-part-and-roi): Pack Studio reduces every packaging option to one figure: box, protective packaging, pallet and freight divided across the parts on board.
- [Returnable Assets](https://www.pack-studio.com/features/returnable-assets): Pack Studio sizes the returnable fleet a program needs, from totes and bins to steel racks and wooden crates, and calculates the months until reuse savings repay the investment.
- [Truckload Optimization](https://www.pack-studio.com/features/truckload-optimization): Pack Studio loads pallets into trucks and shipping containers, such as a 53 ft dry van, and shows parts per truck and whether the load is limited by cube or by weight.

## Keep reading

- [What tools cut packaging engineering time?](https://www.pack-studio.com/answers/cut-packaging-engineering-time)
- [How do I choose packaging optimization software?](https://www.pack-studio.com/answers/how-to-choose-packaging-optimization-software)
- [Packaging Optimization Software: The Complete Guide](https://www.pack-studio.com/post/industrial-packaging-optimization-software)
- [All answers](https://www.pack-studio.com/answers)

[^1]: Engineering hours saved per vehicle launch: 250 to 600 hours. 1,500 to 2,000 estimates at 15 to 20 minutes before versus 2 to 5 minutes after. Source: [One year in. Zero regrets. Lucid Motors one-year review of Pack Studio](https://www.pack-studio.com/lucid), 2026-06-23.
[^2]: Labor cost savings per vehicle launch: $17K to $42K. Per vehicle launch. Source: [One year in. Zero regrets. Lucid Motors one-year review of Pack Studio](https://www.pack-studio.com/lucid), 2026-06-23.
[^3]: Time per packaging estimate, historical workflow: 15 to 20 minutes. Carton density study, palletizing software and PowerPoint, before Pack Studio. Source: [One year in. Zero regrets. Lucid Motors one-year review of Pack Studio](https://www.pack-studio.com/lucid), 2026-06-23.
[^4]: Time per packaging estimate with Pack Studio, CAD import to finished report: 2 to 5 minutes. Start to report, including packaging and freight cost. Source: [One year in. Zero regrets. Lucid Motors one-year review of Pack Studio](https://www.pack-studio.com/lucid), 2026-06-23.
[^5]: Packaging estimates per vehicle launch: 1,500 to 2,000. Per vehicle launch, built from CAD before sourcing begins. Source: [One year in. Zero regrets. Lucid Motors one-year review of Pack Studio](https://www.pack-studio.com/lucid), 2026-06-23.
[^6]: Range of cost-per-part reductions across seven published cases: 15% to 40% lower cost per part. Same part, container and freight in each comparison; only the packing decision changes. Source: [Stacking: Minimizing the Shipping Cost for Stamped Parts](https://www.pack-studio.com/post/stacking-minimizing-the-shipping-cost-for-stamped-parts), 2026-08-17.
