---
title: "How to Choose Packaging Optimization Software | Pack Studio"
url: "https://www.pack-studio.com/answers/how-to-choose-packaging-optimization-software"
description: "Eight questions to ask any packaging optimization software vendor, from real part geometry and dunnage to pallet and truck layouts, landed cost and exports."
updated: "2026-11-19"
type: "WebPage"
---

Answers /// Deciding

# How do I choose packaging optimization software?

**Short answer:** Choose the tool that packs your real part geometry and costs every option on landed cost per part, across box, protective packaging, pallet and truck. Test it on your hardest part, and ask every vendor the eight questions below before you buy.

Updated November 19, 2026

Use this checklist with any vendor, including us. Each question is followed by why it matters and how Pack Studio answers it.

## 1. Does it pack the real part geometry?

Bounding boxes hide the space that concave and organic parts leave behind. Ask for a run on actual CAD. *Pack Studio packs the part's true geometry, with stable, minimal and [Optimal](https://www.pack-studio.com/features/part-orientation) poses.*

## 2. Does it choose the orientation, or do you?

The densest pose is rarely the obvious one. *Pack Studio searches the full space of 3D rotations and ranks each pose on cost.*

## 3. Does it handle protective packaging?

Dunnage changes the box, the weight and the cost. *Partitions, foam inserts, die-cut foam and thermoformed trays are designed around the pack and priced in. See the [Dunnage Designer](https://www.pack-studio.com/features/dunnage-designer).*

## 4. Does it go past the box to the pallet and the truck?

Freight usually decides the winner. *Pack Studio builds the unit load and loads the truck, such as a 53 ft dry van. See [Truckload Optimization](https://www.pack-studio.com/features/truckload-optimization).*

## 5. What is the ranking metric?

Density alone can pick the wrong option. *Every option is ranked on [cost per part](https://www.pack-studio.com/features/cost-per-part-and-roi): box, protective packaging, pallet and freight divided across the parts on board.*

## 6. Does it cover returnables as well as cartons?

Fleet decisions are capital decisions. *Pack Studio sizes returnable fleets and reports a break-even period. See [Returnable Assets](https://www.pack-studio.com/features/returnable-assets).*

## 7. What comes out the other end?

A result nobody can act on is a dead end. *A one-page PDF report, 3D exports in 3MF, STL or OBJ, and dunnage as DXF, STEP or STL. See [Pack Reports](https://www.pack-studio.com/features/pack-reports).*

## 8. Where did the algorithm come from, and how fast is it?

Speed matters at program scale, and provenance matters when a launch depends on it. *Pack Studio's engine is Scalable Spectral Packing (SSP), published in ACM Transactions on Graphics, SIGGRAPH 2023[^1], and it goes from part CAD to layouts in under 90 seconds[^2]. See the [technology](https://www.pack-studio.com/technology).*

## Then test it on your hardest part

A demo on a vendor's sample part proves little. Bring the part that won't nest. [Send us a part](https://www.pack-studio.com/part-challenge) or [book a demo](https://www.pack-studio.com/contact).

## The numbers behind this answer

- **Scalable Spectral Packing (SSP):** ACM Transactions on Graphics, SIGGRAPH 2023[^1], Peer-reviewed publication
- **Pack Studio:** under 90 seconds[^2], Time from part CAD to box, pallet, container and truck layout

## The features behind this answer

- [Part Orientation](https://www.pack-studio.com/features/part-orientation): Pack Studio proposes stable, minimal and Optimal poses for every part, packs each one and ranks them on cost per part.
- [Dunnage Designer](https://www.pack-studio.com/features/dunnage-designer): Pack Studio generates manufacturing-ready dunnage straight from the optimized pack: die-cut foam trays, foam inserts and thermoformed plastic trays.
- [Truckload Optimization](https://www.pack-studio.com/features/truckload-optimization): Pack Studio loads pallets into trucks and shipping containers, such as a 53 ft dry van, and shows parts per truck and whether the load is limited by cube or by weight.
- [Cost Per Part and ROI](https://www.pack-studio.com/features/cost-per-part-and-roi): Pack Studio reduces every packaging option to one figure: box, protective packaging, pallet and freight divided across the parts on board.
- [Returnable Assets](https://www.pack-studio.com/features/returnable-assets): Pack Studio sizes the returnable fleet a program needs, from totes and bins to steel racks and wooden crates, and calculates the months until reuse savings repay the investment.
- [Pack Reports](https://www.pack-studio.com/features/pack-reports): Every Pack Studio analysis ends in a one-page PDF covering the part, box, pallet, truck, protective packaging and full cost.

## Keep reading

- [Is packaging optimization software worth the investment?](https://www.pack-studio.com/answers/is-packaging-optimization-software-worth-it)
- [How do packaging engineers go from part CAD to a shippable pack without switching tools?](https://www.pack-studio.com/answers/from-cad-to-shippable-pack)
- [Packaging Optimization Software: The Complete Guide](https://www.pack-studio.com/post/industrial-packaging-optimization-software)
- [All answers](https://www.pack-studio.com/answers)

[^1]: Peer-reviewed publication: ACM Transactions on Graphics, SIGGRAPH 2023. Cui, Rong, Chen and Matusik; Inkbit and MIT CSAIL. Source: [Dense, Interlocking-Free and Scalable Spectral Packing of Generic 3D Objects](https://doi.org/10.1145/3592126), 2023-08-01.
[^2]: Time from part CAD to box, pallet, container and truck layout: under 90 seconds. Layout generation for one part across selected containers. Source: [One year in. Zero regrets. Lucid Motors one-year review of Pack Studio](https://www.pack-studio.com/lucid), 2026-06-23.
