---
title: "From Part CAD to Shippable Pack in One Tool | Pack Studio"
url: "https://www.pack-studio.com/answers/from-cad-to-shippable-pack"
description: "How packaging engineers go from part CAD to a costed box, pallet and truck layout in one tool, step by step, and what replacing a three-tool workflow saves."
updated: "2026-11-19"
type: "WebPage"
---

Answers /// Evaluating

# How do packaging engineers go from part CAD to a shippable pack without switching tools?

**Short answer:** Import the part CAD into one platform that orients and packs the part, adds protective packaging, builds the pallet and truck load, and ranks every option on landed cost per part. At Lucid Motors that replaced three tools and cut each estimate from 15 to 20 minutes[^1] to 2 to 5 minutes[^2].

Updated November 19, 2026

## The old way takes three tools and a slide deck

A typical packaging estimate touches a density study tool for parts per box, palletizing software for the unit load, and a spreadsheet or deck for cost and reporting. None of them share data, so every change means re-entering the part and re-checking the math. At Lucid Motors, that three-tool workflow took 15 to 20 minutes[^1] per estimate.

## One tool, one pass

Pack Studio carries the part from CAD to a costed decision without leaving the application. The same run covers orientation, the packing method, protective packaging, the pallet, the truck and the cost model, and it can evaluate expendable corrugated, returnable plastic bins, large-format metal racks, pallet configurations and full truckloads[^3] together. The output is a ranked list, not a set of files to reconcile.

## What changes for the engineer

- Standards are set once and reused as Packing Environments, so every estimate follows the same rules.
- A change to the part or the container reruns the whole chain in seconds.
- The deliverable is a one-page report, not a deck assembled by hand.

## What it changed at Lucid Motors

Lucid's packaging team consolidated 3 tools[^4] into Pack Studio. Estimates that took 15 to 20 minutes[^1] now take 2 to 5 minutes[^2], from CAD import to a finished report with packaging and freight cost. Read the [case study](https://www.pack-studio.com/lucid).

## From part CAD to a shippable pack

1. **Import the part.** Bring in part CAD directly. If CAD does not exist yet, describe the part as a box, sphere or cylinder in the Part Designer.
2. **Set the standards once.** Choose packing methods, margins, protective packaging, ergonomic weight caps, pallets, trucks and freight rates, and save them as a Packing Environment.
3. **Generate the options.** Pack Studio orients and packs the part, designs the dunnage, builds the unit load and loads the truck for every container you selected.
4. **Rank on landed cost.** Every option is reduced to cost per part: box, protective packaging, pallet and freight divided across the parts on board.
5. **Share it and build it.** Export a one-page report for leadership or a customer, and send dunnage to manufacturing as DXF, STEP or STL.

## The numbers behind this answer

- **Lucid Motors packaging engineering team:** 3 tools[^4], Disconnected tools replaced by one platform
- **Lucid Motors packaging engineering team:** 15 to 20 minutes[^1], Time per packaging estimate, historical workflow
- **Lucid Motors packaging engineering team:** 2 to 5 minutes[^2], Time per packaging estimate with Pack Studio, CAD import to finished report

## The features behind this answer

- [Part Orientation](https://www.pack-studio.com/features/part-orientation): Pack Studio proposes stable, minimal and Optimal poses for every part, packs each one and ranks them on cost per part.
- [Planar Layering](https://www.pack-studio.com/features/planar-layering): Planar Layering builds the pack one flat, repeatable layer at a time, so operators unload it by hand and quality teams count it at a glance.
- [Dunnage Designer](https://www.pack-studio.com/features/dunnage-designer): Pack Studio generates manufacturing-ready dunnage straight from the optimized pack: die-cut foam trays, foam inserts and thermoformed plastic trays.
- [Pallet Optimization](https://www.pack-studio.com/features/pallet-optimization): Pack Studio builds each palletized unit load from the packed carton: parts per layer and per pallet, footprint, weight against ergonomic and load limits, and the stacking load each carton must carry.
- [Truckload Optimization](https://www.pack-studio.com/features/truckload-optimization): Pack Studio loads pallets into trucks and shipping containers, such as a 53 ft dry van, and shows parts per truck and whether the load is limited by cube or by weight.
- [Pack Reports](https://www.pack-studio.com/features/pack-reports): Every Pack Studio analysis ends in a one-page PDF covering the part, box, pallet, truck, protective packaging and full cost.

## Keep reading

- [What tools cut packaging engineering time?](https://www.pack-studio.com/answers/cut-packaging-engineering-time)
- [Is packaging optimization software worth the investment?](https://www.pack-studio.com/answers/is-packaging-optimization-software-worth-it)
- [Packaging Optimization Software: The Complete Guide](https://www.pack-studio.com/post/industrial-packaging-optimization-software)
- [All answers](https://www.pack-studio.com/answers)

[^1]: Time per packaging estimate, historical workflow: 15 to 20 minutes. Carton density study, palletizing software and PowerPoint, before Pack Studio. Source: [One year in. Zero regrets. Lucid Motors one-year review of Pack Studio](https://www.pack-studio.com/lucid), 2026-06-23.
[^2]: Time per packaging estimate with Pack Studio, CAD import to finished report: 2 to 5 minutes. Start to report, including packaging and freight cost. Source: [One year in. Zero regrets. Lucid Motors one-year review of Pack Studio](https://www.pack-studio.com/lucid), 2026-06-23.
[^3]: Containers evaluated in a single run: expendable corrugated, returnable plastic bins, large-format metal racks, pallet configurations and full truckloads. 2026 development; the run ends in a one-page report. Source: [Pack Studio, a new packaging design platform, drives packaging cost analysis upstream into logistics planning](https://www.automotivelogistics.media/packaging/pack-studio-a-new-packaging-design-platform-drives-packaging-cost-analysis-upstream-into-logistics-planning/2704118), 2026-07-27.
[^4]: Disconnected tools replaced by one platform: 3 tools. Density study tool, palletizing software and PowerPoint. Source: [One year in. Zero regrets. Lucid Motors one-year review of Pack Studio](https://www.pack-studio.com/lucid), 2026-06-23.
