---
title: "Best Orientation for Packing Complex Parts | Pack Studio"
url: "https://www.pack-studio.com/answers/best-orientation-for-packing-complex-parts"
description: "Why the densest packing orientation for a complex part is rarely the obvious one, how Scalable Spectral Packing searches 3D rotations, and published results."
updated: "2026-11-19"
type: "WebPage"
---

Answers /// Evaluating

# How do I pack complex parts at the best orientation?

**Short answer:** Search the full space of 3D rotations for the pose in which copies of the part nest tightest, then cost each candidate on the same box, pallet and freight. Pack Studio does that automatically, and in a published study the winning pose left cost per part 23% lower[^1] and 15% lower[^2] on two complex parts.

Updated November 19, 2026

## Why the obvious pose is usually wrong

People orient parts by intuition: flat face down, long axis along the box. For box-shaped parts that works. For complex, organic or awkward parts, the densest arrangement often uses a tilted pose that lets copies interleave. There are infinitely many rotations, and testing even a handful by hand in CAD takes hours.

## Three kinds of pose worth testing

- **Stable poses:** the ways the part rests on a flat surface without tipping. Practical for hand packing.
- **Minimal poses:** the axes of the part's tightest bounding box. A quick baseline.
- **Optimal pose:** found by searching rotations for the densest lattice of copies.

## How the search works

Pack Studio's engine, Scalable Spectral Packing (SSP), represents parts and containers as voxel grids and uses the fast Fourier transform (FFT) to score collisions and gaps for every candidate position at once. That is what makes searching many rotations fast enough to run on every part. The paper behind it, published in ACM Transactions on Graphics, SIGGRAPH 2023[^3], reports placing 670 objects in 40 seconds[^4].

Every candidate pose is then costed with the full model, box, protective packaging, pallet and freight, so the pose that wins is the least expensive to ship, not just the densest.

## What it changes

In Pack Studio's published study, with the same carton, pallet, truck and freight, the Optimal pose left cost per part 23% lower[^1] for a plastic figurine and 15% lower[^2] for a steel pipe connector.

## Try it

[Part Orientation](https://www.pack-studio.com/features/part-orientation) runs inside every analysis. Bring the part you think is already optimized, or [send it to us](https://www.pack-studio.com/part-challenge).

## The numbers behind this answer

- **Plastic figurine part, about 4.3 × 2.9 × 2.2 in, 0.1 lb:** 23% lower[^1], cost per part, Optimal orientation versus best hand-picked orientation. $0.0364 to $0.0281 per part; 33 to 40 parts per box; 118,800 to 144,000 parts per truck
- **Steel multiway pipe connector, about 4.2 × 3.7 × 1.8 in, 0.4 lb:** 15% lower[^2], cost per part, Optimal orientation versus best of six hand-picked orientations. $0.0270 to $0.0229 per part; 44 to 54 parts per box; weight-limited truckload
- **Scalable Spectral Packing (SSP):** 40 seconds[^4], Time to place 670 objects

## The features behind this answer

- [Part Orientation](https://www.pack-studio.com/features/part-orientation): Pack Studio proposes stable, minimal and Optimal poses for every part, packs each one and ranks them on cost per part.
- [Flexible Layering](https://www.pack-studio.com/features/flexible-layering): Flexible Layering arranges copies of a part in a three-dimensional lattice, so they interlock across every axis instead of sitting in separate layers.
- [Planar Layering](https://www.pack-studio.com/features/planar-layering): Planar Layering builds the pack one flat, repeatable layer at a time, so operators unload it by hand and quality teams count it at a glance.
- [Nesting and Repacking](https://www.pack-studio.com/features/nesting-and-repacking): Horizontal Nesting lets neighboring parts tuck into each other's concave features, and Repacking fills the corners and headroom left after the main pack.

## Keep reading

- [How can software reduce packaging material waste?](https://www.pack-studio.com/answers/reduce-packaging-material-waste)
- [How do I choose packaging optimization software?](https://www.pack-studio.com/answers/how-to-choose-packaging-optimization-software)
- [Packaging Optimization Software: The Complete Guide](https://www.pack-studio.com/post/industrial-packaging-optimization-software)
- [Optimal Orientation: Packing Complex Parts at the Best Angle](https://www.pack-studio.com/post/optimal-orientation-packing-complex-parts-at-the-best-angle)
- [All answers](https://www.pack-studio.com/answers)

[^1]: Cost per part, Optimal orientation versus best hand-picked orientation: 23% lower. RSC 12 × 12 × 8 in carton, single-wall C flute (ECT 32); Planar Layering with Horizontal Nesting; 48 × 40 in pallet; 53 ft dry van; freight $200 per delivery plus $2 per mile over 100 miles. Source: [Optimal Orientation: Packing Complex Parts at the Best Angle](https://www.pack-studio.com/post/optimal-orientation-packing-complex-parts-at-the-best-angle), 2026-08-07.
[^2]: Cost per part, Optimal orientation versus best of six hand-picked orientations: 15% lower. Same carton, pallet, truck and freight as the figurine study. Source: [Optimal Orientation: Packing Complex Parts at the Best Angle](https://www.pack-studio.com/post/optimal-orientation-packing-complex-parts-at-the-best-angle), 2026-08-07.
[^3]: Peer-reviewed publication: ACM Transactions on Graphics, SIGGRAPH 2023. Cui, Rong, Chen and Matusik; Inkbit and MIT CSAIL. Source: [Dense, Interlocking-Free and Scalable Spectral Packing of Generic 3D Objects](https://doi.org/10.1145/3592126), 2023-08-01.
[^4]: Time to place 670 objects: 40 seconds. About 36% packing density. Source: [The chore of packing just got faster and easier](https://news.mit.edu/2023/chore-packing-just-got-faster-and-easier-0706), 2023-07-06.
